Cf_System Command - Canon 7215 - LV XGA LCD Projector Specification

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.7.3 CF_INPUT_%1_%2 COMMAND
COMMAND "CF_INPUT_%1_%2" [CR]
"COMPUTER1".... Select COMPUTER 1 input
%1 "COMPUTER2".... Select COMPUTER 2 input
"VIDEO".................... Select VIDEO input
When %1 is COMPUTER1...
When %1 is COMPUTER2
%2
When %1 is VIDEO
Select Input and also the source that is specified in %2.
Details
(Only valid when it is in the usual Power ON status.)
Acceptable
Response
Unacceptable
8.7.4 CF_SYSTEMCOMMAND
COMMAND "CF_SYSTEM_%1" [CR]
%1
Input-VIDEO
Select current Input system.
（Only valid when it is in the usual Power ON status.)
When Input does not meet the requirement for specified %11, the response
will be "101" and the Command does not execute.
Details
Note 1) "NTSC" / "NTSC4.43" / "PAL" / "SECAM" / "PAL-M" / "PAL-N" is
available only when Input-VIDEO or S-VIDEO.
Note 2) "1080I" / "1035I" / "720p" / "575P" / "480P" / "575I" / "480I" is
available only when Input is Y, Pb/Cb, Pr/Cr.
"ANALOG"............ Select ANALOG RGB input
"DIGITAL"............Select DIV input
"HDCP".................... Select DCHP input
"ANALOG"............Select ANALOG RGB input
"YPBPR"................Select Component input
"SCART"................ Select SCART input
"AUTO"..................Select VIDEO AUTO MODE
"VIDEO"................ Select VIDEO
"S-VIDEO"............ Select S-VIDEO
"000" [CR]
"%%%" [CR]
"MODE1"------ Select MODE 1
"MODE2"------ Select MODE 2
Input is PC "MODE3"------ Select MODE 3
"MODE4"------ Select MODE 4
"MODE5"------ Select MODE 5
"AUTO"-------- Select System" AUTO"
"NTSC"-------- Select NTSC
"NTSC443"-- Select NTSC4.43
"PAL"---------- Select PAL
"SECAM"------ Select SECAM
"PAL-Ｍ"------ Select PAL-M
"PAL-Ｎ"------ Select PAL-N
"1080Ｉ"------ Select 1080i
"1035Ｉ"------ Select 1035i
"720Ｐ"-------- Select 720p
"575Ｐ"-------- Select 575p
"480Ｐ"-------- Select 480p
"575Ｉ"-------- Select 575i
"480Ｉ"-------- Select 480i
Page 24