Image (Toggle) Command; On Start Setting Command; On Start Cancellation Command; Power Management Ready Command - Canon 7215 - LV XGA LCD Projector Specification

Basic Serial Functional Specification for LV-5210/7215/7210

6.31 IMAGE (Toggle) COMMAND

COMMAND "C27" [CR]
Switch Image setting status.
Detail This command works the same as the remote control's "Image" button or the
Acceptable
Response
Unacceptable

6.32 ON START SETTING COMMAND

COMMAND "C28" [CR]
Set to Power ON setting status
Detail
This setting status is stored in EEPROM, even if the power is ON/OFF.
Acceptable
Response
Unacceptable
6.33 ON STARTCANCELLATINO COMMAND
COMMAND "C29" [CR]
Cancel Power ON Start
Detail
This status is stored in EEPROM even when power is OFF or ON
Acceptable
Response
Unacceptable

6.34 Power Management Ready COMMAND

COMMAND "C2A" [CR]
Set Power Management to Ready
Detail
This status is stored in EEPROM, so even if turning off and on.
Acceptable
Response
Unacceptable

6.35 Power Management OFF COMMAND

COMMAND "C2B" [CR]
Set Power Management to OFF mode.
Detail
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable
Response
Unacceptable

6.36 Power Management Shut down COMMAND

COMMAND "C2E" [CR]
Set Power Management to Shut down mode.
Detail
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable
Response
Unacceptable
key on the projector body.
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
Page 14