Windows ® Vista ™ (32/64-Bit) - D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter User Manual

To install the driver, proceed as follows:
1. After you have installed the network adapter in your computer, boot Windows Vista. The Window "Found New Hardware" is
displayed. On the screen the menu "Locate and install driver software (recommended)", "Ask me again later", and "Don't
show this message again for this device" three options are displayed.
2. Select Ask.me.again.later.
3. Click on Start.>.Control.Panel.>.System.and.Maintenance.>.Device.Manager. The Window "Windows needs your
permission to continue" is displayed. To continue the installation, Click Continue.anyway.
4. Expand Other.devices plus (+) sign.
5. Click on Ethernet.Controller and right-click mouse button to then choose Properties.
6. Click Driver in the tab menu.
7. Click Update.Driver....The window "How do you want to search for driver software" is displayed. On the screen the menu
"Search automatically for updated driver software" and "Browse my computer for driver software" two options are displayed.
For locating drivers, click Browse.my.computer.for.driver.software.
8. The window "Browse for driver software on your computer" is displayed. Browse the path to the driver and click Next.
9. The window "Windows has successfully updated your driver software" is displayed.
10. Click Close to complete the installation.
D-Link DGE-560T User Manual
Windows Vista
®
(32/64-bit)
™
0