4
Configuring Linksys Key System Parameters
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Enabling Call Features
STEP 1
STEP 2
STEP 3
56
To configure the phone as part of a Linksys Key System (for use with the
SPA9000):
Log in to the web administration interface.
Click Admin Login and advanced.
Click the SIP tab.
Configure the following fields:
•
Linksys Key System—Enables or disables the Linksys Key System for use
with the LVS SPA9000. Defaults to yes. See the
Administration Guide
•
Multicast Address—Used by the SPA9000 to communicate with Cisco IP
phones. Defaults to 224. 1 68. 1 68. 1 68:6061.
•
Force LAN Codec—Used with the SPA9000. Choices are none, G.711u, or
G.711a. Defaults to none.
Click Submit All Changes.
This section describes how to enable and disable call features on the phone.
Enabling Anonymous Call and Caller ID Blocking
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
Customizing Cisco SPA and Wireless IP Phones
Configuring Linksys Key System Parameters
for more details.
Cisco SPA and Wireless IP Phone Administration Guide
Cisco SPA9000 System