Toshiba Gigabeat S MES60V Service Manual page 17

[T&D Transfer]
4) Start up the [Transfer Program (Ottoman.exe)] on the PC and select the scenario file (*.ini) in which
files to be transferred are described.
Ottoman.exe and the scenario file are provided on the CD-ROM (Material No.: 360058245). Names for
the destination-wise stored folder and file are different depending on the destination. The relationship
between destination and folder is shown on the table below.
Table Destination and Folder
Destination Folder name
Japan OTTOMAN_T&D_FW_JP
U.S.A. OTTOMAN_T&D_FW_US
Start up the Ottoman.exe and select the scenario file. Then, the menu below appears.
.
Fig. Menu display on the PC (T&D Transfer)
Check two points of (A) and (B) on the above menu. These are different depending on the destination
((A) is same.) The display for every destination is as follows.
Table Differences of display by destination (Differences are underlined.)
Destination (A)
Japan version 0.9.9.10
U.S.A. version 0.9.9.10
Scenario file name
OTTOMAN_T&D_FW_JP.ini
OTTOMAN_T&D_FW_US.ini
(B)
(B)
T&D TRANS PROG(JP) Ver.6423A
T&D TRANS PROG(US) Ver.6423A
13
(A)