Transferring Data Using Windows Media Player - Yamaha POCKETRAK 2G - 2 GB Digital Player Reference Manual

Transferring data using Windows Media Player

This section explains how to transfer MP3/WMA files to the unit using Windows Media Player.
Select [Start] menu → [All programs] → [Windows Media Player] to start the program.
6) Click
5) Check
1.
Click [Sync] tab.
When you transfer DRM10 content WMA files to the unit, set USB SETTING to
"for WMA DRM10"
2.
Connect the unit to the computer.
Note:
· If the system displays "Device Setup" window, select "Manual", then click [Finish].
3.
Select [Removable Disk] (if "USB2.0" has been selected) or [Digital Voice
Recorder] (if "for WMA DRM10" has been selected) from the pull-down
menu on the right side to display the files.
4.
Select [All Music] from the "Sync List" pull-down menu.
5.
Check the box for the songs that you wish to transfer to the unit.
6.
Click [Start Sync].
The system starts synchronizing to the device.
Never disconnect the unit from your computer during file transfer.
1) Click
(page 35).
Using the unit as a music player
4) Select
POCKETRAK 2G Reference Manual
3) Select
47