Rear Panel - Pioneer BDP-09FD - Elite Blu-Ray Disc Player Operating Instructions Manual

Rear Panel

01
1 AUDIO OUT (7.1 ch) terminals
Connect with the multi-channel (7.1- or 5.1-channel) audio input
terminals on an AV receiver or amplifier, etc. (page 19).
To connect to the 2-channel audio input terminals on a TV, etc.,
connect to FRONT (L/R).
2 AC IN
Connect the power cord here.
3 VIDEO OUT terminals
VIDEO – Connect with the video input terminal on a TV, AV
receiver or amplifier, etc. (page 18).
S-VIDEO – Connect with the S-Video input terminal on a TV, AV
receiver or amplifier, etc. (page 18).
COMPONENT VIDEO (BNC jacks) – Connect with the
component video input terminals on a TV, AV receiver or
amplifier, etc. (page 18).
4 RS-232C terminal
This terminal is not used.
5 HDMI OUT terminals
MAIN (KURO LINK) – Connect with an HDMI-compatible TV, AV
receiver or amplifier, etc. (page 16).
SUB – Connect with an HDMI-compatible TV, projector, etc.
(page 16). This terminal outputs linear PCM 2-channel audio
signals. Do not connect an AV receiver or amplifier to this
terminal. Also note that the KURO LINK function will not work
for devices connected to this terminal (page 16).
14
En
1
AUDIO OUT ( 7.1 ch )
FRONT SUB WOOFER CENTER
L
R
LAN(100) DIGITAL OUT
CONTROL
IN
HDMI OUT
OPTICAL COAXIAL
MAIN(KURO LINK)
8 7 6
SURROUND SURROUND
L L
R R
BACK
VIDEO OUT
S-VIDEO VIDEO
RS-232 C
COMPONENT VIDEO
SUB P P Y
R B
5 4 3
6 DIGITAL OUT (COAXIAL/OPTICAL) terminals
Connect with the digital audio input terminal on an AV receiver or
amplifier, etc. (page 19).
7 LAN (100) terminal
Ethernet port for 100BASE-TX (100 Mbps) network connection
(page 20).
8 CONTROL IN terminal
Use to control this player from the remote sensor of another Pioneer
component with a CONTROL OUT terminal and bearing the 
mark. Connect the CONTROL OUT terminal of the other component
to CONTROL IN on this player using a mini-plug cord (commercially
available).
Caution
• Be sure to connect cables for outputting the audio and video
signals.
• When connected via System Control, point the remote control
toward the connected component (such as an AV receiver or
amplifier). The remote will not work correctly when pointed at
this player.
• You cannot use System Control with components that do not
have a System Control terminal or with components
manufactured by companies other than Pioneer.
2