Table of Contents
Advertisement
Electrical Connections (continued)
Speaker Connections
Caution
Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
<Right>
(White)
+
+
L
-
-
(White/Black)
(Gray)
+
+
R
-
-
(Gray/Black)
<Wrong>
+
+
L
-
-
Chassis
+
+
R
-
-
Chassis
¡ Never connect the speaker
cord to the body of the car.
Connection with optional SiriusXM Connect Vehicle Tuner
Satellite Radio Antenna
Main unit
Direction when connection
34
¡ Use ungrounded speaker only.
¡ The maximum speaker input should be 45 W or more. (If used with the
optional power amplifier, the speaker input should be higher than the maxi-
mum amplifier output.)
¡ The speaker impedance should be 4 – 8 Ω.
¡ This unit uses the BTCL circuit, so each speaker should be connected sepa-
rately using parallel vinyl insulated cords.
¡ The speaker cords and the power amplifier unit should be kept away (about
30 cm apart) from the antenna and antenna extension cord.
+
L
-
+
R
-
¡ Do not use a 3-wire type
speaker system having a com-
mon earth lead.
Note: Please notice the cable direction for
correct connection.
+
+
L
-
-
+
+
R
-
¡ Do not connect more than one
speaker to one set of speaker
leads.
C O N N E C T
SiriusXM Connect Vehicle Tuner (Optional)
Note: Refer to installation guide included with the
SiriusXM Connect Vehicle Tuner for more information.
+
+
-
-
+
+
-
-
-
Hide quick links:
Advertisement
Table of Contents
