Configuring Data Destinations and Categories
Example 5
Finally,
•
•
•
Figure 8-6
SCE(config)# rdr-formatter forwarding-mode multi-cast
SCE(config)# rdr-formatter category number 1 name billing
SCE(config)# rdr-formatter category number 2 name prepaid
SCE(config)# rdr-formatter category number 3 name special-prepaid
SCE(config)# rdr-formatter destination 10.1.1.205 port 33000 category name billing
priority 90 category name prepaid priority 80 protocol RdrV1 transport tcp
SCE(config)# rdr-formatter destination 10.10.10.96 port 33000 category name prepaid
priority 90 category name special-prepaid priority 80 protocol RdrV1 transport tcp
SCE(config)# rdr-formatter destination 10.1.1.206 port 33000 category name special-prepaid
priority 90 protocol NetFlowV9 transport udp
Configuring the Forwarding Mode
In a deployment where there are multiple destinations for at least one category, and at least one of those
is a NetFlow destination, the multicast forwarding mode must be configured.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
8-12
Figure 8-6
illustrates a configuration with three categories and three destinations, as follows:
Category 1: 'Billing", RDRv1 protocol, goes to Destination 1
Category 2: "Prepaid", RDRv1 protocol, goes to Destinations 1 and 2
Category 3: "Special Prepaid", NetFlow V9 protocol, goes to Destination 3, RDRv1 protocol goes
to Destination 2
Configuring Destinations: Three Categories and Two Protocols
SCE platform
RDR Formatter
"Billing"
"Prepaid"
"Special Prepaid" Netflow
"Special Prepaid" RDRv1
Chapter 8
Raw Data Formatting: The RDR Formatter and NetFlow Exporting
Destination 1
Destination 2
Destination 3
OL-7827-12