Bosch KBD-DIGITAL User Manual page 15

IntuiKey Keyboard
Bosch Security System, Inc.
Program Sequence Changes the softkey display and requests entry of a sequence
number to program. The status display shows the following:
Figure 2.6 Program Sequence Display
Upon entry of a sequence number followed by ENTER, the softkey
display changes to the following menu to support sequence
programming:
Figure 2.7 Program Sequence Menu
–
–
–
–
–
–
–
User Manual
Controlling Allegiant Series Video Switchers | en
- - -
Alarm#
Allegiant
Exit/ Exit/
Save Run
Previous Insert
Step Step
Next Delete
Step Current
Step
Delete
from Here
to End
Exit/Save
Saves the present sequence and exits the Program Sequence
menu.
Previous Step
Displays the previous sequence step on the OSD (on-screen
display) and allows editing.
Next Step
Displays the next sequence step on the OSD and allows
editing.
Exit/Run
Saves the present sequence, loads it, runs it, then exits the
Program Sequence menu.
Insert Step
Inserts a step before the sequence step presently displayed
on the OSD.
Delete Current Step
Deletes the current step. Note that if this is done on the first
step of a single-step sequence, the sequence is erased and
the programming mode is automatically exited.
Delete from Here to End
Deletes all remaining steps after the step presently displayed
on the OSD.
11
F.01U.127.291 | 1.93 | 2009.03