Adjusting The Audio Balance; Using The Test Tone - Yamaha YSP-3000bl Owner's Manual

Adjusting the audio balance
You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back
in each beam mode to achieve a more true-to-life surround sound experience.
Using the test tone
You can use the test tone feature to output a test tone from
each channel to manually balance the channel levels.
Use this to set the channel levels so that the volume level
of each channel is identical when heard from your
listening position.
<5":70
::.~e ~
v:
l
........v .......
o
v
0
~@ffi
DOD
eM LEVEL 1DT
~..,.
CJ CJJ~lij
(U.S.A. and Canada models)
1
Set the operation mode selector to YSP.
3
Press
.6. / ""V
to select the channel you want
to adjust.
The front panel display changes as follows:
TEST FF.:ONT L
~
TEST CENTEF.:
~
TEST FF.:ONT F.:
~
TEST SUF.:. F.:
~
TEST SUF.:. L
~
TEST SldFF.:
Note
"TEST SWFR" is only available when a subwoofer is
connected to this unit and SWFR is selected for BASS OUT
in SOUND MENU (see page 78).
2
Press TEST.
"TEST FRONT L" appears in the front panel display
and a test tone is output from the front left channel.
4
Press
<1/
t>
to adjust the channel volume.
84
En
TEST
~
. .
TEST FF.:ONT L
:1
Control range: -10.0 dB to +10.0 dB