Safety Regulations
1. Make certain the storage does not present and electrical hazard.
2. Always unplug the storage before repairing it.
3. When testing the storage with the power on, use insulated gloves for safety.
4. Make certain instruments, such as a volt meter, are set for the appropriate
voltage range.
5. Do not allow water or moisture to get into the mechanical or electrical parts of the
storage.
6. Remove all foods, dishes, racks, etc. from the refrigerator before tilting it during
repairs to avoid spills.
7. Refer all repairs of the sealed system to an Authorized servicer who has the
appropriate refrigerant recovery equipment. Escaping refrigerant could cause injury,
pollute the air, or cause other environmental concern.
Contents
4. Circuit Diagram .................................................................................................. 10
2