Table of Contents
Advertisement
English
Troubleshooting
Fan does not turn on, but light turns on.
This is probably due to either a defective fan switch or a burned-out fan motor.
Fan only runs at one speed.
Please see instructions above for troubleshooting when your fan does not turn on,
but lights turn on.
Fan circulates air, but does not vent outside.
(applies only to 2000 series models)
If air is blowing through the front vent openings, then your range hood has been
a technician must install metal ductwork from the range hood through either an
outside wall or the roof and ensure blower has been positioned correctly for your
If air is not blowing from the front vent openings, check inside the cabinet above
the range hood. If you see a metal duct leading away from the vent hood, then
you have a system that vents to the outdoors. If you do not see a duct, your unit
may be venting through the back wall.
Light does not turn on, but fan does.
This could be due to a burned out bulb. Try replacing the light bulb. If the light
Neither the fan nor the light turn on at all.
Check for a tripped circuit breaker or a blown fuse, since the range hood is
wired directly to your household electrical system.
NOTE:
13
Advertisement
Table of Contents
