Advertisement
232
233
237
238
Response: At the time of a success
22H 0FH 01H xxH 01H DATA01 CKS
(*1) (*2)
Data Portion Contents
-------------------------------------------------------------------
DATA01
Results
00H : Normal
FFH : Error
Response: At the time of a failure
A2H 0FH 01H xxH 02H DATA01 DATA02 CKS
(*1)
(*2)
(!) About AUTO key
The MT series model with the built-in image sensor does not support the AUTO key. Use the AUTO (SHORT) key.
(!!) HT10 series, LT180, LT30 series, NP40 series and NP4000 series
(!!!) VT60 series, VT70 series, VT80 series, and VT90 series
Command example:
* Sending the AUTO key code
02H 0FH 00H 00H 02H 05H 00H 18H
* Sending the AUTO (SHORT) key code
02H 0FH 00H 00H 02H DDH 00H F0H
------------------------------------------
* cycle/toggle volume mute
* cycle/toggle picture mute
* cycle/toggle picture freeze
02H 0FH 00H 00H 02H DATA01 DATA02 CKS
Data Portion Contents
--------------------------------------------------------------------
DATA01/DATA02 12H/00H : Volume mute
DATA01/DATA02 11H/00H : Picture mute
DATA01/DATA02 8AH/00H : Picture freeze
------------------------------------------
* cycle aspect ratio
02H 0FH 00H 00H 02H DATA01 DATA02 CKS
Data Portion Contents
--------------------------------------------------------------------
DATA01/DATA02 A3H/00H : Aspect Ratio
------------------------------------------
* all menu functionality (digits 0-9, cursor movement, enter, select, return, back, clear, etc)
02H 0FH 00H 00H 02H DATA01 DATA02 CKS
E8H
00H
D ZOOM UP (WT)
E9H
00H
D ZOOM DOWN (WT)
EDH
00H
PSCODE(Passcode screen will be displayed at once)
EEH
00H
LAMP MODE (!!!)
(*3)
(*4)
(*3)
Advertisement
