Cisco WS-C5008B - Power Supply - 1100 Watt Installation Manual page 16

Unpacking and Installing the Controller
(Optional) Use the supplied M4x0.7 x 20mm pan head screw to attach the cable guide to either the left
Step 7
or right bracket (see
Note
Figure 11
Installing the Controller in a 2-Post Rack—Flush Mount
The controller weighs 20 lbs (9.1 kg) with both power supplies installed. Two or more people must work
Caution
together to install the controller.
This unit might have more than one power supply connection. All connections must be removed to
Warning
de-energize the unit. Statement 1028
Follow these steps to flush mount the controller in a 2-post equipment rack:
Attach one of the front brackets to the controller using three M4 screws (see
Step 1
steps to attach the second bracket to the opposite side.
Note
Cisco 5500 Series Wireless Controller Installation Guide
16
Figure 11).
We recommend that you attach the cable guide to prevent the cables from obscuring the front
panel of the switch and the other devices installed in the rack.
Installing the Cable Guide
Ci sc o 55
00 Se rie
s W ire les
s Co nt ro
lle r
RP SP
USB 0 USB CON SOLE
1
EN
EN
1
2
3
4 Mo de l 55
5
6 08
7
8
PS1 PS2
SYS ACT
Only three of the four holes on each bracket are used (top, left, and right).
Figure 12). Follow the same
78-18998-01