Connecting To A Network - NEC MM2000 User Manual

2. Installation

2-5. Connecting to a Network

Connect various control terminals as required.
The switcher is provided with a LAN port (RJ-45) as standard equipment. With a LAN cable connected, you can utilize the LAN
environment.
In addition, when the switcher is connected with a PC using a LAN cross cable, you can use a mode for setting and adjustment
of the switcher (standalone mode).
Contact your dealer/distributor about use of the switcher in standalone mode.
[Example of Connection with LAN]
Server
PC
PC
* When the switcher and PC are connected, use the LAN cross cable.
14
Touch panel controller
(option)
Hub
MM2000
NC series projector
LAN cable* (not supplied)
LAN