D-Link DCS-1000W Manual page 28

address in this field.
Sender e-mail is the person's e-mail address that will be sending the
e-mail.
Receiver e-mail is the e-mail address of the person that will receive
the e-mail.
Sending Interval is the period of time between each e-mail being sent
to the receiver. If the setting is at 10 seconds, a new e-mail will be
sent in 10 seconds interval to the receiver.
Sending Time is the number of times the e-mail will be sent to the
receiver before it terminates.
Select "Trigger I/O Output" and enter the setting for the duration of the
output device for Output 1 time and Output 2 time in seconds.
I/O Input 2 Trigger:
Refer to "I/O Input 1 Trigger" information above.
Save/Cancel:
After making sure all settings in the System are correct, click on the "Save"
icon to store the settings for the DCS-1000W. You can alternatively click on
the "Cancel" icon to restore all settings to the values last saved to or retrieved
from DCS-1000W.
When connecting other devices through the I/O connectors, please make sure the
maximum current of 100mA is strictly observed. Any failure to do so might cause a
loss of power to DCS-1000W and possibly cause serious damage to the Internet
Camera.
Please refer to the appendix for detailed information regarding the I/O
Connector.
Warning
27