Chapter 5
Configuring Simple Network Management Protocol (SNMP)
Displaying the SNMP Configuration
Managing SNMP on the CSS
Enabling SNMP Manager Access to the CSS
Note
OL-5647-02
After you configure SNMP, display the SNMP configuration. For example:
(config)# show running-config global
Refer to
Chapter 1, Managing the CSS
running-config command and its output.
This section describes the activities that you need to perform to manage SNMP on
the CSS. This section includes the following topics:
Enabling SNMP Manager Access to the CSS
•
Using the CSS to Look Up MIB Objects
•
•
Reading Logs
Setting RMON Alarms
•
By default, the CSS enables SNMP access to its command base. You must first
create community strings using the snmp community command before you can
use SNMP in the CSS. See the
details.
SNMP is not a secure network environment. Do not use SNMP by itself to provide
security for your network.
Software, for details on the show
"Configuring an SNMP Community"
Cisco Content Services Switch Administration Guide
Displaying the SNMP Configuration
section for
5-29