4 Modem Setup and Driver Installation
This chapter shows you how to set up your Modem for ADSL Internet access.
Prepare to Install the DSLMON Software and USB Driver
MPoA Bridge or Routed Setting
PPPoA or PPPoE Setting
Connection Status Monitoring
Prepare to Install the DSLMON Software and USB Driver
Before install the AAM6000UG USB ADSL Modem, you should have information below from your
Internet Service Provide (ISP) or Telephone Company. Once the information has confirmed, you may
now choose one of the installation type, "MPoA Bridge/Routed" or "PPPoA/PPPoE", follow by the
sections below to complete driver installation.
MPoA Bridge/Routed Needed Information
Required Information
VPI:
The Virtual Path Identifier number identifies a
bundle of virtual channels.
VCI:
The Virtual Path Identifier number identifies a
logical connection between end stations.
Framing Type & Encapsulation:
Bridge LLC/VC MUX or Route LLC/VC MUX
Connection Standard:
ANSI T1.413, G.lite, G.dmt, Multi-Standard
IP address: (When using Static IP)
The IP address given from your ISP.
Subnet Mask: (When using Static IP)
The subnet Mask given from your ISP.
Default Gateway: (When using Static IP)
The default gateway given from your ISP.
Preferred DNS Server: (When using Static IP)
Primary DNS server IP given from your ISP.
Alternate DNS Server: (When using Static IP)
Secondary DNS server IP given from your ISP.
ADSL Modem User's Manual
Default Value
Fill in the Blanks
8
35
Bridge LLC
Multi-Standard
Automatically
Automatically
Automatically
Automatically
Automatically
9