Screensaver (For Preventing Image Retention); Function Selection - Panasonic TH-50PH12L Operating Instructions Manual

SCREENSAVER
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
1
2

FUNCTION selection

3
MODE selection
4
START setting
5
(For preventing image retention)
Press to display the SET UP menu.
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the FUNCTION.
Press to select the desired function.
NEGATIVE IMAGE
WHITE SCREEN OVERLAY SCROLLING BAR
NEGATIVE IMAGE
SCROLLING BAR ONLY : A white bar will scroll from left to right. The image won't be displayed.
OVERLAY SCROLLING BAR : The brightness of the image will be decreased and a white bar will scroll on it.
WHITE SCREEN
Note: OVERLAY SCROLLING BAR is not effective during two screen display.
Press to select the
MODE.
Press to select each
mode items.
When the MODE is set to ON, press to select START.
Press to start SCREENSAVER.
The menu screen will disappear and the SCREENSAVER will be activated. To stop the
SCREENSAVER under ON, press the R button or any buttons on the main unit.
Note: When the display is turned off, the SCREENSAVER will be deactivated.
SCROLLING BAR ONLY
: A negative image will be displayed on the screen.
: The whole screen will be white.
Off
INTERVAL : Operates when SHOW DURATION and SAVER
DURATION are set up and those times arrive.
TIME OF DAY : Operates when START TIME and FINISH TIME
are set up and those times arrive.
STANDBY AFTER SCR SAVER : Operates while SCREENSAVER DURATION,
and display enters standby mode.
ON : Operates when START is selected and the
ACTION ( ) button is pressed.
SET UP 1/2
SIGNAL
SCREENSAVER
EXTENDED LIFE SETTINGS
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL PC
POWER SAVE OFF
STANDBY SAVE OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF OFF
ENGLISH ( US )
OSD LANGUAGE
SCREENSAVER
PRESENT TIME OF DAY 99:99
START
FUNCTION SCROLLING BAR ONLY
OFF
MODE
31