Table of Contents
Advertisement
Removing an External Drive
To remove an external drive:
1. Click the Device tab.
2. Click the External Drive button.
3. Mouse-over the external drive and click the Remove button.
4. Click the Confirm button.
3.7
Storage Tab
The Storage tab enables you to create, manage, and delete disk arrays,
logical drives, and spare drives.
The list of Disk Arrays provides disk array information, including:
ID – DA0, DA1, DA2, etc.
Alias – If assigned.
Status – Green, yellow or red icon.
Capacity – Data capacity of the disk array.
Free Capacity – Unconfigured or unused capacity on the physical
drives.
Media Patrol – Enabled or disabled on this disk array.
No. Of Logical Drives – The number of logical drives on this disk array.
3.7.1
Creating a Disk Array
You can also use the Wizard to create a disk array with logical drives and
a spare drive at the same time.
To safely remove an external USB drive, click the
Remove button before you disconnect the drive.
Caution
33
Advertisement
Table of Contents
