Preparing And Installing The Rails; Preparing The Adjustable Fixed Rail - HP 245161-B22 - 10642 42U Rack Shock Pallet Reference Manual

Preparing and Installing the Rails

IMPORTANT: The installation instructions below are for standard installations. For specific
installation instructions, please refer to the documentation included with your component.
There are two types of rack-mountable rails:
•
Adjustable fixed rails
•
Sliding rails

Preparing the Adjustable Fixed Rail.

Components mounted with adjustable fixed rails are typically designed to slide into
the rack one time for initial installation.
1. Loosen the wing nuts (1) and extend the rail-mounting brackets to the desired
length (2).
Figure 4-3: Adjusting the fixed rails
2. Tighten the wing nuts slightly to stabilize the rail-mounting brackets
during installation.
HP 10000 Series Rack Reference Guide
1
2
Installing Components
4-7