Active States - Pioneer CLD-V2400 Programmer's Reference Manual

Transitions Between Active States
DOOR OPEN
RANDOM ACCESS
PLAY
Figure 2-B
2.2 Player Indicators for the CLD-V2400 & CLD-V2600
The CLD-V2400 has four indicator lights on the front panel. These four indicators are
explained below. (See diagram of CLD-V2400's Front Panel, Figure 2-F, on page 2-7.)
Digital Sound (green) —
except when a disc with no digital audio is in the disc tray.
Disc Set (green) —
the player.
Play/Standby (green)—
when disc rotation stops, during a search and while in the lead-out area. It also
lights up during playback.
Key Lock Indicator (red) —
command has been sent to the player to lock out the front panel buttons, the
barcode reader and remote control buttons, preventing them from being used
during execution of a Level III program.
The CLD-V2600 has an illuminated front panel display and a Standby light that
indicates the player is plugged in, but not powered on. It also has a Key Lock light,
indicating when the front panel buttons or remote control or LaserBarcode Control
have been locked out under Level III, RS-232C control. Please see Figure 2-C on the
next page for details of the illuminated display window on the front panel. Also see
Figure 2-D on page 2-5 for other details on the Front Panel.
CLD-V2600 / 2400 Level I & III User's Manual
CLD-V2600 / 2400 Level I & III • Chapter Two
OPEN
CLOSE
STILL
MULTI-SPEED
(Chapter/Track)
This indicator lights up after power is turned on,
The Disc Set indicator lights up when a disc is loaded in
This indicator flashes when the disc begins to spin up,
The Key Lock indicator lights up if a computer
PARK
SPIN UP
SCAN
SKIP
SEARCH
TP 117 v. 2.0 • 12/93
SPIN DOWN
PAUSE
2-3