66
USING THE REMOTE CONTROL UNIT
EN
Connector
cover**
To EDIT
To
S-VIDEO
Editing
S-Video
cable
cable
(provided)
(provided)
To
Yellow to
S-VIDEO IN
VIDEO
IN*
To Remote
PAUSE or
R.A.EDIT
VCR
To PAUSE IN
DISPLAY
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
JY-VS200U EN 66-95
MAKE CONNECTIONS
Also refer to pg. 54 and 55.
1
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
To AV
A JVC VCR not equipped with a remote
pause connector but equipped with an
R.A.EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control's PAUSE IN connector.
2
Audio/Video
Insert a recorded tape into the camcorder and set the
cable
Power Switch to "
(provided)
Lock Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's instructions).
White to
NOTES:
AUDIO L IN
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
Red to
they will be recorded onto the new tape.
AUDIO R
IN
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
•Time Code
..... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen (
•Playback Sound Mode, Tape Speed And Tape Running
TV
Displays
..... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen (
remote control.
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
66
(cont.)
" while pressing down the
pg. 41).
pg. 41).
pg. 41). Or, press DISPLAY on the
01.3.12, 7:31 PM