UF-80 DX/ST
B A S I C
The Samsung UF-80 DX/ST provides control of the basic operations on the front panel of the Digital Presenter. Please note that you
can also access these features via the Remote Control or the PS/2 Mouse by right-clicking on the mouse button to access
the menu. Advanced features are found on both the remote and menu commands via the mouse.
Turn on the main power switch of the
Use the FREEZE button to "hold" any
image on the screen while you change
document camera. After the boot-up
your subject or to freeze a subject in any
screen, the presenter will perform an
position.
automatic white balance or "Color
To release the FREEZE mode, press the
Adjustment."
FREEZE button again or EXIT button on
the remote control.
Tip:
Make sure there is no subject mat-
ter on the display surface to affect white
Tip:
balance. Printed text on white paper is
a live image or divided image in order to
OK.
activate the Draw menu command for
annotation.
LAMP
Select a proper lighting source with the LAMP
button of the presenter. Pressing the LAMP but-
ton turns the upper lamp on or off.
Tip
: Use the upper lamps for documents and
other subjects. Use the SLB-80 Lightbox to illumi-
nate overheads, X-rays, and slides.
ZOOM
Press the ZOOM
or ZOOM
settings to reduce or enlarge
the image size.
Tip:
Make sure you're not moving the subject during auto focus. If
the subject is blurry, press the AF button to re-focus.
Note:
If you save an image when in the Digital Zoom mode, the
UF-80 will only save the maximum optical zoom image (14x) to
maintain overall image quality.
O P E R A T I O N S
FREEZE
AWC
For automatic color adjustment, press the
AWC button.
Tip:
For best results, only activate AWC
with a white surface under the lens.
The FREEZE button is used to freeze
INT/EXT
Use this to switch between internal or external
images.
INT : to view the image from the UF-80.
EXT : to view the VGA output from another
source such as a personal computer connected to
the VGA input of the presenter.
Quick Start Guide
AF
Pressing the AF button will activate an
auto focus adjustment at any time.
Manual focus is available on the remote
or menu via the mouse.
Tip:
Use the mouse and the built-in
menu command for extremely accurate
manual focus control...especially good for
3-dimensional subjects when at maxi-
mum zoom.
BRIGHT
Press the BRIGHT
button on the control panel to lighten the overall image.
Press the BRIGHT
button on the control panel to darken the overall image.
Tip:
When displaying a glossy document,
turn off the upper lamp and adjust the brightness
to obtain the desired result.
SAMSUNG TECHWIN CO.,LTD
ROTATE (DX)
press the ROTATE button.
to rotate the image in 90 180 270 0 increments.
TXT/IMG (ST)
Press the TXT/IMG button to control
the sharpness of the output image.
TXT : For a material with mostly words.
IMG : For a material with mostly image.
presenter
www.samsung
.com