Canon 0213B002 Instruction Manual page 32

Storing
Put the lens cap to the lens.
1
Be sure to turn the power OFF before storing the unit.
NOTICE
Direct the camera head sideways until it stops.
2
Hold the arm with your right hand and press
3
the arm lock release lever, then pull the arm
down to the document table very carefully.
Make sure to hold the arm when stowing it. If the arm is
NOTICE
stowed without being held, the arm jumps up and may result
in injury or malfunction. Please stow it slowly.
Fold the pair of illumination lamps very carefully.
4
Fold the left-hand illumination lamp first, then the right-hand
illumination lamp (
CAUTION
9
/ ).
Do not touch the fluorescent lamps after the
illumination lamps are turned off, as they may still
be hot.
CAUTION
Put the supplied unit cover on the RE-455X when the unit is not in use. The unit
cover has a pocket to store cords.
• Make sure the unit has adequately cooled off before putting on
the cover.
• Place the unit horizontally when storing it. If the unit is stored
vertically, it may fall down, resulting in injury or malfunction.
• To carry the unit, turn the power OFF, disconnect the cords, fold
the unit, and pull out the carrying handle.
Arm lock release lever