Cisco ATA188-I2 Configuration page 22

The Cisco ATA 188 performs auto-negotiation for
Note
duplexity and speed and is capable of 10/100
Mbps, full-duplex operation. The Cisco ATA 186
is fixed at 10 Mbps, half-duplex operation.
• The Cisco ATA 188 RJ-45 LED shows network link and
activity. The LED blinks twice when the Cisco ATA is first
powered on, then turns off if there is no link or activity. The
LED blinks to show network activity and is solid when
there is a link.
• The Cisco ATA 186 RJ-45 LED is solid when the Cisco ATA
is powered on and blinks to show network activity.
• Function button—The function button is located on the top
panel of the unit (see Figure 6).
22