Panasonic CF-H1BDBBZCM Operating Instructions Manual page 23

Display
<Only for model with GPS>
The cursor cannot be
controlled properly.
Touch Screen Operation
The cursor does not work.
Cannot point the correct
position.
Reference Manual
The Reference Manual is
not displayed.
Cannot close full screen
mode of Adobe Reader.
Others
No response.
The battery indicator lights
in red.
Operate the following steps.
A Set [GPS] to [Disabled] in the [Advanced - Serial Port Confi guration] of the Setup
Utility.
F10
B Press and select [Yes] at the confi rmation message, and press
The computer will restart.
C Log on to Windows as an administrator.
D Click (Start) and input "c:\util\drivers\gps\GPS.reg" in [Search programs and
fi les], and press (Enter) .
E Click [Yes], click[Yes] and click [OK].
Then restart the computer.
F2 Del
F Press or while [Panasonic] boot screen is displayed.
G Set [GPS] to [Enabled] in the [Advanced - Serial Port Confi guration].
F10
H Press and select [Yes] at the confi rmation message, and press
When using the external mouse, connect it correctly.
Restart the computer using the keyboard.
Press (Windows) and press
press (Enter).
U
Press (Windows), and
If the computer does not respond to keyboard commands, read "No response." (
below).
Perform the touchscreen calibration (
Install Adobe Reader.
A Log on to Windows as an administrator.
B
Click (Start) and input "c:\util\reader\setup.exe" in [Search for programs and fi les]
then press (Enter) .
Click [start] - [Run], input "c:\util\reader\setup.exe", then click [OK].
Follow the on-screen instructions.
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click [Help]
- [Check for Updates].
Click [Edit] - [Preferences] - [Full Screen] and add the check mark to [Show navigation
bar] before starting full screen mode.
If you started full screen mode without above setting, set the computer to the Cradle and
connect the external keyboard to the Cradle, then press
Press[ ] button to open Task Manager and close the software application that is not
responding.
An input screen (e.g., password input screen at startup) may be hidden behind another
Alt Tab
window. Press +
Press the power switch for 4 seconds or longer to shut down the computer, and then
press the power switch to turn it on. If the application program does not work normally,
uninstall and reinstall the program.
To uninstall:
Click (Start) - [Control Panel] - [Uninstall a program].
Click [start] - [Control Panel] - [Add or Remove Programs].
Connect the AC adaptor to charge the battery. The computer may not enter hibernation,
even if [Hibernate] is selected as the action when the battery level becomes low.
two times, and press
R
to select [Restart].
page 14).
to check.
(Enter).
(Enter).
to select [Restart] and
Esc
.
23