Page 1 Satellite A100/A105 ® User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Something Goes Wrong” on page 172 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and ®...
Page 4: Fcc Requirements
Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com. ❖ Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5 If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Regulatory Information
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 9 documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10: Eu Declaration Of Conformity
EU Declaration of Conformity TOSHIBA declares, that the product: PLU10* conforms to the following Standards: Supplementary *The product complies with the Information: requirements of the Low Voltage Directive 72/23/EEC, the EMC Directive 89/336/ EEC and/or the R&TTE Directive 1999/ 05/EEC.
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 12: Device Authorization
This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 13: Radio Approvals For Wireless Devices
The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Page 14 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 15 802.11a (5 GHz) Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community 5150-5250 MHz 5250-5350 MHz...
Page 16 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 17 802.11a (5 GHz) Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland Turbo Mode (5 GHz) Canada ® Approved Countries/Regions for use for the Intel PRO/ Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18: Bluetooth Wireless Technology Interoperability
Bluetooth Wireless Technology Interoperability ® Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖ Bluetooth Specification as defined and approved by The Bluetooth Special...
Page 19 Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.
Page 20: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 22 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 23 Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 24 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 25 TouchPad is a trademark of Synaptics, Inc. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 26: Table Of Contents
Keeping yourself comfortable ......40 Precautions............40 Important information on your computer’s cooling fan ..........43 Setting up your computer ........43 Setting up your software........44 Registering your computer with Toshiba ....45 Setting up other devices ........45 Connecting to a power source ........46 Charging the main battery........49...
Page 27 Contents Using the computer for the first time ......50 Opening the display panel .........50 Your computer’s features and specifications ..51 Turning on the power ........51 Adding memory (optional) ........52 Installing a memory module ......53 Removing a memory module......58 Using the TouchPad..........60 Scrolling with the TouchPad ......61 Control buttons ..........61 Disabling or enabling the TouchPad ....61...
Page 28 Playing CDs using Auto-Run......99 Creating a CD ............99 Removing a disc with the computer on...100 Removing a disc with the computer off ..101 Caring for CD or DVD Discs ......101 Toshiba’s online resources ........102 Chapter 3: Mobile Computing..........103 Toshiba’s energy-saver design......103...
Page 29 Contents Running the computer on battery power ....103 Battery Notice ..........104 Power management ........105 Using additional batteries .......105 Charging batteries..........106 Charging the main battery.......106 Charging the RTC battery........107 Monitoring main battery power......108 Determining remaining battery power.....110 What to do when the main battery runs low ...111 Setting battery alarms........112 Conserving battery power ......112 Power Profiles ..........113...
Page 30 Removing an ExpressCard ......141 Using the Bridge Media Adapter Slot ....142 Inserting memory media.........142 Removing memory media.......143 Using the i.LINK port ..........143 Chapter 5: Toshiba Utilities............145 Fn-esse ..............146 Starting Fn-esse..........146 Using the keyboard or pointing device to assign keys ..........148 Viewing existing key assignments....149...
Page 31 Customizing a power mode ......158 Mouse utility ............159 Hotkey utility ............159 TOSHIBA HW Setup ..........160 TOSHIBA Zooming Utility........162 TOSHIBA Touch and Launch utility .......163 TOSHIBA Touch and Launch Settings.....166 Disabling or enabling TOSHIBA Touch and Launch ............167 SD Memory Card Format ........168 TOSHIBA Button Controls ........168...
Page 32 Data and system configuration backup in Windows XP ..........206 If you need further assistance.......212 Before you contact Toshiba ......212 Contacting Toshiba .........213 Other Toshiba Internet Web sites ......214 Toshiba’s worldwide offices........215 Appendix A: Hot Keys..............217 Volume Mute ............217 Password security ..........218 Without a password ........218...
Page 33 Disabling or enabling wireless devices....224 Disabling or enabling the TouchPad .....224 Keyboard hot keys ..........225 Zooming applications in/out .........225 Appendix B: Power Cord/Cable Connectors......226 Appendix C: Using ConfigFree with your Toshiba Computer ............227 Getting Started............228 Starting ConfigFree .........228 ConfigFree Utilities..........230 Connectivity Doctor ........230...
Page 34: Introduction
Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you ® Certain Microsoft software product(s) included with this NOTE computer may use technological measures for copy protection.
Page 35: This Guide
Toshiba's Web site at pcsupport.toshiba.com While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 36: Safety Icons
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not...
Page 37: Other Icons Used
Other documentation Your computer comes with the following documentation: ❖ An electronic version of the user’s guide ❖ It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba's Web site at accessories.toshiba.com.
Page 38: Service Options
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page 172.
Page 39: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 40: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 41 Getting Started Selecting a place to work Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1.
Page 42 Getting Started Selecting a place to work Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in its operation. Before you remove a PC Card, always wait for it to cool. You could get burned removing a hot PC Card.
Page 43: Important Information On Your Computer's Cooling Fan
Getting Started Setting up your computer Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. To prevent possible overheating of the CPU, make sure the air intake on the cooling fan is not blocked.
Page 44: Setting Up Your Software
Getting Started Setting up your computer To register your computer online or to sign up for an Internet account, you must either establish a Local Area Network (LAN) connection, or connect the built-in modem to a telephone line (see “Connecting the modem to a telephone line”...
Page 45: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 46: Connecting To A Power Source
As a general safety precaution, avoid touching any metal parts. Always use the Toshiba AC adapter that was provided with your computer, or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer, possibly resulting in serious injury.
Page 47 Getting Started Connecting to a power source To connect AC power to the computer: Connect the power cord/cable to the AC adapter. Sample connecting the power cord/cable to the AC adapter Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 48 Getting Started Connecting to a power source The AC power light on the indicator panel glows blue or green, depending on your model. Never tamper with the cord/cable or plug; never splice or alter a cord/cable; never bend or twist a cord/cable; never place heavy objects on a cord/cable;...
Page 49: Charging The Main Battery
Getting Started Charging the main battery NOTE If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the main battery pack.
Page 50: Using The Computer For The First Time
Getting Started Using the computer for the first time Battery life and charge time may vary depending on the NOTE applications, power management settings, and features used. Using the computer for the first time The computer is now ready for you to turn it on and begin using it.
Page 51: Your Computer's Features And Specifications
Getting Started Using the computer for the first time the brightness of the screen will deteriorate. This is also an intrinsic characteristic of the screen technology. When the computer is operated on battery power, the screen will dim and you may not be able to increase the brightness of the screen while on battery power.
Page 52: Adding Memory (Optional)
You may want to increase the computer’s memory if you use complex software or process large amounts of data. For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com.
Page 53: Installing A Memory Module
Getting Started Adding memory (optional) NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer. You will need a standard Phillips No.
Page 54 Getting Started Adding memory (optional) If the computer is on, begin at step 1; otherwise, skip to step If the computer is on, click Start, Turn off (or Shut down - depending on the system). The Turn off computer window appears. Click Turn Off.
Page 55 Getting Started Adding memory (optional) Front of computer Unscrewing the memory module slot cover Remove the memory slot cover. Place the screw and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 56 Getting Started Adding memory (optional) Front of computer Memory slots Sample inserting the memory module into the slot Hold the memory module by its edges so that the gold connector bar faces the slot, at a slight angle to the socket.
Page 57 Getting Started Adding memory (optional) Gently press down on the memory module connector until the clips snap into place. clip clip Sample pressing down on the memory module Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place.
Page 58: Removing A Memory Module
Getting Started Adding memory (optional) If you are adding an extra memory module after setting up the computer, verify that the computer has recognized it correctly as described in “Checking total memory” on page Removing a memory module If you need to remove a memory module: Complete steps 1–8 “Installing a memory module”...
Page 59: Checking Total Memory
Getting Started Adding memory (optional) Front of computer Memory slots Sample removing the memory module Replace the memory module slot cover and tighten the screw. Re-insert the battery. For more information on inserting the battery, see “Changing the main battery” on page 115.
Page 60: Using The Touchpad
Getting Started Using the TouchPad™ If the computer does not recognize the memory configuration, turn off the computer, remove the memory slot cover, and check that the module is inserted completely into the socket and lined up squarely with the socket clips. ™...
Page 61: Scrolling With The Touchpad
Getting Started Using the TouchPad™ ™ Scrolling with the TouchPad There are two active regions on the TouchPad that allow you to scroll as you would with any wheel device on a mouse or trackball. To scroll vertically, run your finger up or down along the right edge of the TouchPad.
Page 62 Getting Started Using the TouchPad™ Sample TouchPAD ON/OFF screen Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Close the Printers and Other Hardware window. Close the Control Panel window. You can also use a hot key to disable or enable the TouchPad. “Disabling or enabling the TouchPad”...
Page 63: Turning Off The Computer
Getting Started Turning off the computer Turning off the computer Pressing the power button before shutting down the ® Windows operating system could cause you to lose your work. Make sure the system indicator panel’s disk light and the drive-in-use light are off. If you turn off the power while a disk is being accessed, you may lose data or damage the disk and/ or drive.
Page 64: Hibernation Mode
Getting Started Turning off the computer commands to save your system settings so that, when you turn on the computer again, you will automatically return to where you left off. TECHNICAL NOTE: Before using any of these options to shut down or turn off your computer, save your files and make sure the disk activity lights are off.
Page 65 Getting Started Turning off the computer For information on placing your computer into, and configuring your computer for Hibernation mode, see “Using and configuring Hibernation mode” on page Standby mode The Standby command places the computer into a power- saving mode. Standby holds the current state of the computer in system memory (RAM) so that, when you restart the computer, you can continue working from where you left off.
Page 66: Using The Turn Off Computer Or Shut Down Commands
Getting Started Turning off the computer Using the Turn Off Computer or Shut Down commands Depending on the operating system installed, use the following steps to turn off your computer. Turn Off ® ® For Windows XP Home, or either Windows ®...
Page 67 To use this method, you first need to activate it using Toshiba’s Power Saver utility. Click Start, Control Panel, then click Performance and Maintenance. Click the Toshiba Power Saver icon. Click on the Setup Action tab. Sample setup action settings screen Select the options you want from the drop-down lists.
Page 68: Using And Configuring Hibernation Mode
Click Apply. Click OK. For more information about the Power Saver utility, see NOTE “TOSHIBA Power Saver” on page 156. Once the computer is configured, you can turn it off by either pressing the power button or closing the display panel, depending on the options set.
Page 69 To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, then click Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Hibernation for the options you want. ❖...
Page 70: Using And Configuring Standby Mode
Standby mode. To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, then click Performance and Maintenance.
Page 71: Closing The Display Panel
Getting Started Turning off the computer Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Standby for the options you want. ❖ When I press the power button Set this option to Standby if you want the computer to go into Standby mode when you press the power button.
Page 72: Using External Display Devices
Getting Started Using external display devices Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video port: ❖ An external monitor or projector via the RGB (monitor) port.
Page 73: Directing The Display Output When You Turn On The Computer
Getting Started Using external display devices Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key ( Press simultaneously.
Page 74: Adjusting The Quality Of The External Display
Getting Started Using an external keyboard Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps.
Page 75: Connecting A Local Printer
Getting Started Connecting a local printer Connecting a local printer Your printer documentation may require you to install the NOTE printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 76: Setting Up A Printer
Getting Started Connecting a local printer To connect a USB printer to your computer: Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports. Plug the printer’s power cable into a live AC outlet. Setting up a printer Some printers require a specific installation process.
Page 77: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes. Sample optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports.
Page 78: Cleaning The Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. Sample computer lock cable...
Page 79 Getting Started Caring for your computer To secure the computer: Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. Pass the locking end through the loop. Insert the cable’s locking end into the security lock slot on your computer, then engage the locking device.
Page 80: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 81 ❖ Before turning off the computer, use the Turn off computer command or Standby command. See “Toshiba’s online resources” on page 102 to learn more about Standby. The Windows XP operating system records information, such ®...
Page 82: Using The Keyboard
Learning the Basics Using the keyboard Using the keyboard Your computer’s keyboard contains character keys, control ® keys, function keys, and special Windows keys, providing all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 83: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard programs assign separate functions to the right and left Ctrl keys, or to the regular and numeric pad keys on Enter the full-sized keyboard. Using the key, you can simulate these separate keys, as follows: ❖...
Page 84: Windows Special Keys
Learning the Basics Using the keyboard Windows special keys Windows key Application key Sample Windows special keys Your computer’s keyboard has two keys that have special functions in Windows: ❖ Windows key—Opens the Start menu ❖ Application key—Has the same function as the secondary mouse button Overlay keys The keys with gray numbers and symbols on the front of...
Page 85: Using The Overlay To Type Numeric Data
Learning the Basics Starting a program Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on.
Page 86: Starting A Program From The Start Menu
Learning the Basics Starting a program The next three sections explain how to start a program from the Start menu, Explorer and the Run dialog box. Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu.
Page 87: Starting A Program From The Run Dialog Box
Learning the Basics Starting a program Click Windows Explorer. Click My Computer to expand the window. In the left part of the window, click the line that ends in “(C:).” In the left part of the window, under the C: icon, double- click the folder containing the program, in this case Program Files.
Page 88: Saving Your Work
Learning the Basics Saving your work In the Run dialog box: ❖ If you know the program’s location, type the ® command line. For a program in the Windows folder, type just the program name. Otherwise, type the full file path. For example, to access WordPad, type: c:\Program Files\Windows NT\Accessories\Wordpad.exe, then click OK.
Page 89 Learning the Basics Saving your work Saving files ® On the File menu of your Windows program, click Save. If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box.
Page 90: Printing Your Work
Learning the Basics Printing your work File names The Windows XP operating system supports long file names which can contain up to 255 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters. You may use all the letters and numbers on the keyboard plus these characters: _ ^ $ ~ ! # % &...
Page 91: Backing Up Your Work
Learning the Basics Backing up your work To print a file: If your printer is not on, turn it on now. ® Open the File menu of your Windows program and click Print. The program displays a Print dialog box. Sample Print dialog box Specify the print parameters.
Page 92: Restoring Your Work
Learning the Basics Using the DVD-ROM or multi-function drive HINT: Backing up all the files on your hard disk may take a considerable amount of time and multiple CDs/DVDs. You may prefer to use a high-capacity backup system, such as an external hard drive.
Page 93: Dvd-Rom Or Multi-Function Drive Components
Learning the Basics Using the DVD-ROM or multi-function drive TECHNICAL NOTE: Your DVD-ROM or multi-function drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region. The drive will allow you to change regions four times.
Page 94: Cd/Dvd Control Buttons
Learning the Basics Using the DVD-ROM or multi-function drive Do not press the eject button or turn off the computer while the Drive in-use indicator light is glowing. Doing so could damage the disc or the drive. When the disc tray is open, be careful not to touch the lens or the area around it.
Page 95 Learning the Basics Using the DVD-ROM or multi-function drive The Internet button/CD/DVD button lets you access the internet when the computer is powered on or activates a media playing application that can play audio CDs or DVD movies when the computer is powered off. The following chart describes the Internet button/CD/DVD button functionality.
Page 96: Inserting A Compact Disc
Learning the Basics Using the DVD-ROM or multi-function drive The play/pause button starts playing the disc or makes it pause if currently playing. The stop button stops a disc that is currently playing. Inserting a compact disc To insert a compact disc into the drive: Make sure the computer is turned on.
Page 97 If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 98: Playing An Audio Cd
Learning the Basics Using the DVD-ROM or multi-function drive Playing an audio CD Insert an audio CD and close the disc tray. ® If the computer is turned on, Windows Media Player opens and the CD begins to play. You can use the Windows Media Player program to control the CD.
Page 99: Playing Cds Using Auto-Run
Learning the Basics Using the DVD-ROM or multi-function drive The Windows Media Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/pause button. ❖ To stop the CD, click the Stop button. Before putting on headphones to listen to an audio CD, turn the volume dial down.
Page 100: Removing A Disc With The Computer On
PCs or optical media players. These problems are not due to any defect in your Toshiba PC or optical drive. Please refer to your PC's product specification for listing of specific format compatibilities.
Page 101: Removing A Disc With The Computer Off
Learning the Basics Using the DVD-ROM or multi-function drive Pull the tray out until it is fully open, remove the disc, and place it in its protective cover. Gently push the tray in to close it. Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject hole.
Page 102: Toshiba's Online Resources
Let the disc dry completely before inserting it in the drive. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 103: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 104: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. See "Detailed Specs" for specific battery measurement test. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 105: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 106: Charging Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Battery charge time may vary depending on the applications, NOTE power management settings, and features used.
Page 107: Charging The Rtc Battery
Mobile Computing Charging batteries The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 108: Monitoring Main Battery Power
Mobile Computing Monitoring main battery power The above error message may vary by computer model. NOTE The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer. The RTC battery charges when the computer is powered on.
Page 109 Mobile Computing Monitoring main battery power ❖ Is unlit when the battery has discharged, the battery is not charging, or the AC adapter is not plugged into the computer or AC outlet. Battery life and charge time may vary, depending upon power NOTE management settings, applications and features used.
Page 110: Determining Remaining Battery Power
The computer needs this time to check the battery’s remaining capacity and perform its calculations. Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. Click the Toshiba Power Saver icon. The Power Saver Properties window appears.
Page 111: What To Do When The Main Battery Runs Low
Mobile Computing Monitoring main battery power The remaining battery charge is indicated on the left side of the dialog box. With repeated discharges and recharges, the battery’s capacity gradually decreases. A frequently used older battery does not power the computer for as long as a new battery, even when both are fully charged.
Page 112: Setting Battery Alarms
To change the default alarm settings: Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. Click the Setup Action tab. Configure the Alarm settings to suit your needs. Conserving battery power...
Page 113: Power Profiles
Toshiba has combined these options into preset Power Profiles. Using one of these profiles lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.
Page 114: Using A Hot Key To Set The Power Profile
Normal setting. Any options that you change become the active settings when you exit the program. (You do not have to restart your system before they become active settings.) For more information, see “TOSHIBA Power Saver” on page 156. Using a hot key to set the Power Profile You may use a hot key to set the Power Profile.
Page 115: Changing The Main Battery
Mobile Computing Changing the main battery For more information on setting the battery Power Profile, “TOSHIBA Power Saver” on page 156. Changing the main battery Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object.
Page 116 Mobile Computing Changing the main battery Unplug and remove any cables connected to the computer, including the AC adapter. Close the display panel and turn the computer upside down with the front of the computer facing you. Slide the battery release lock to the unlocked position. Sample unlocking the battery release lock Slide the battery release latch to release the battery.
Page 117: Inserting A Charged Battery
Mobile Computing Changing the main battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock.
Page 118: Taking Care Of Your Battery
Mobile Computing Taking care of your battery Sample inserting the battery Turn the computer right side up. Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page 115. Restart the computer. Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life.
Page 119: Maximizing Battery Life
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 120 Mobile Computing Taking care of your battery there is some other warning to indicate a low battery, go to step 4. Connect the AC adapter to the computer and the power cord/cable to a power outlet. The DC-IN or AC power-light should glow blue or green, depending on your model, and the battery light should glow amber to indicate that the battery pack is being charged.
Page 121: Disposing Of Used Batteries
Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777.
Page 122: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information.
Page 123: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in ® the Windows XP operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 124: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, System tray, and background pattern. Icons Start button Taskbar System tray ® Sample Windows XP operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 125 Exploring Your Computer’s Features Exploring the desktop The icons initially displayed on your system desktop include: Recycle Bin — Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin.
Page 126: Setting Up For Communications
Exploring Your Computer’s Features Setting up for communications Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 127 Exploring Your Computer’s Features Setting up for communications Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 128: Connecting The Modem To A Telephone Line
Send a fax directly from your computer. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 129: Connecting Your Computer To A Network
Exploring Your Computer’s Features Setting up for communications Connect the other end to the RJ-11 wall jack. Sample connecting to a wall jack The modem is designed for use with a standard analog telephone line. Do not connect the modem to a digital telephone line.
Page 130 Exploring Your Computer’s Features Setting up for communications Setting up the connection To set up an office connection, consult your network administrator for network settings and additional considerations. To set up a dial-up connection, use the New Connection Wizard: Click Start and point to All Programs. Point to Accessories, then to Communications, and click New Connection Wizard.
Page 131 Exploring Your Computer’s Features Setting up for communications To enable the Ethernet LAN port, repeat steps one through four. Select the Use this device (enable) check box, and click Using Wireless LAN Connectivity Wireless connectivity and some features may require you to NOTE purchase additional software, external hardware or services.
Page 132: An Overview Of Using The Internet
Exploring Your Computer’s Features An overview of using the Internet An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖...
Page 133: Internet Service Providers
Exploring Your Computer’s Features An overview of using the Internet Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection.
Page 134: Surfing The Internet
Exploring Your Computer’s Features An overview of using the Internet Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type in the Web address.
Page 135: Uploading To, And Downloading Files From, The Internet
Exploring Your Computer’s Features Exploring audio features clearinghouse where all the messages are placed, like a gigantic bulletin board. ❖ Online shopping Many Web sites offer products and services for sale. Uploading to, and downloading files from, the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Page 136: Using A Microphone
Exploring Your Computer’s Features Exploring audio features Using a microphone Connect an external microphone to the computer. Click Start, point to All Programs, Accessories, Entertainment, then click Sound Recorder. Positioning Record Stop Play Skip forward Skip backward Sample Sound Recorder screen Click the Record button.
Page 137: Using External Speakers Or Headphones
Exploring Your Computer’s Features Exploring audio features Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.
Page 138: Using Pc Cards
Exploring Your Computer’s Features Using PC Cards Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use. Your notebook computer comes with a PC Card slot and supports two types of PC Cards: ❖...
Page 139: Removing A Pc Card
Exploring Your Computer’s Features Using PC Cards ExpressCard slot* PC Card slot * Available on certain models Sample inserting a PC Card When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer.
Page 140: Setting Up A Pc Card For Your Computer
Exploring Your Computer’s Features Using an ExpressCard™ PC Card eject button Sample removing a PC Card Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need to be set up to work with your computer.
Page 141: Removing An Expresscard
Exploring Your Computer’s Features Using an ExpressCard™ Sample inserting an ExpressCard When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer. Do not force the card into position. Removing an ExpressCard Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting...
Page 142: Using The Bridge Media Adapter Slot
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Using the Bridge Media Adapter Slot (Available on certain models) The Bridge Media Adapter slot (available on certain models) supports the use of Memory Stick™ or Memory Stick™ PRO media, Secure Digital™ (SD™) Cards, MMC (MultiMedia Card) or xD-Picture Cards.
Page 143: Removing Memory Media
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Removing memory media Prepare the media for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the media for safe removal, a message will tell you to try again later.
Page 144: Using The I.link Port
Exploring Your Computer’s Features Using the i.LINK® port ® Using the i.LINK port ® The i.LINK port on the left side of the computer provides an extremely fast data transfer rate. ® In addition to high speed, the i.LINK port also supports isochronous data transfer (the delivery of data at a guaranteed rate).
Page 145: Chapter 5: Toshiba Utilities
Your computer includes several utilities designed to help you reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: ❖ ® Fn-esse ❖...
Page 146: Fn-Esse
“Hot Keys” on page 217. You can assign any key that is not associated with a hot key or a keyboard overlay. ® Starting Fn-esse Click Start, point to All Programs, Toshiba, Utilities, then click Fn-esse. The Fn-esse keyboard appears. Sample Fn-esse window...
Page 147 Toshiba Utilities ® Fn-esse The keys are color-coded as follows: ❖ Available keys are dark gray with white letters. ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. ❖...
Page 148: Using The Keyboard Or Pointing Device To Assign Keys
Toshiba Utilities ® Fn-esse The program or document is now associated with the key you just selected. To open the program or document, press plus the appropriate key from within any Windows program. Using the keyboard or pointing device to assign keys...
Page 149: Viewing Existing Key Assignments
Toshiba Utilities ® Fn-esse Making a popup assignment Select Popup... to display the Application Explorer dialog box. Select the desired folder. The left side of the Application Explorer window displays the folders in the Programs menu. The right side lists the programs and documents in the folder.
Page 150: Toshiba Assist
❖ To remove the key assignment, click Clear. TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel: Click Start, All Programs, Toshiba, Utilities, then click Toshiba Assist.
Page 151: Connect
TOSHIBA Power Saver ❖ Mouse utility ❖ Hotkey utility ❖ TOSHIBA HW Setup ❖ TOSHIBA Zooming Utility ❖ TOSHIBA Touch and Launch utility ❖ SD Memory Card Format ❖ ® Hotkey assignment using Fn-esse ❖ TOSHIBA Button Controls ❖ CD/DVD Drive Acoustic Silencer ❖...
Page 152: Setting User Passwords
Setting a password leaves your computer secure so that nobody can access your files. You must enter the password before you can work on your computer. Toshiba supports several types of passwords on your computer: ❖ An instant password — Secures your open programs and files when leaving the computer temporarily.
Page 153: Setting A User Password
Select your user name and enter your password, if any. Setting a user password To register a password for the power-on password functions: Click Start, All Programs, Toshiba, Utilities, then click Toshiba Assist. The TOSHIBA Assist window appears. On the left side, select Secure.
Page 154: Using A Supervisor Password
A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Page 155: Deleting A Supervisor Password
Click OK. Deleting a supervisor password To cancel the power-on password function: Click Start, All Programs, Toshiba, Utilities, then click Toshiba Assist. The TOSHIBA Assist window appears. On the left side, select Secure. Select the Supervisor Password icon.
Page 156: Toshiba Power Saver
Click Start Diagnostics when you are ready to begin the tests. TOSHIBA Power Saver The TOSHIBA Power Saver feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself.
Page 157 You can either use one of the preset modes or create and use your own customized profile. The preset profiles cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function. Any options that you change...
Page 158: Profiles
Toshiba Utilities TOSHIBA Power Saver Profiles This section lists the preset profiles. The preset profiles are: ❖ Full Power ❖ High Power ❖ Normal ❖ DVD Playback ❖ Presentation ❖ Long Life Although you can change the properties for any of these profiles, this is not recommended.
Page 159: Mouse Utility
] and Hibernation [ Fn+F3 Fn+F4 To activate: From the TOSHIBA Assist screen, click Optimize, and then click the Hotkey Utility option. You can also click Start, All Programs, Toshiba, Utilities, then click the Hotkey utility. The Hotkey window appears.
Page 160: Toshiba Hw Setup
Windows. To access it, click Start, Control Panel, then click Printers and Other Hardware. Then click the Toshiba HWSetup icon. You can also access it from the TOSHIBA Assist screen by clicking Optimize, and then TOSHIBA HW Setup. Sample TOSHIBA HWSetup window The tabs represent various dialog boxes.
Page 161 Toshiba Utilities TOSHIBA HW Setup ❖ CPU (available on certain models)—Allows you to enable or disable CPU frequency switching modes. Dynamically Switchable—This mode is the default setting for your computer, and automatically changes the processing frequency and decreases voltage depending on the power source: ❖...
Page 162: Toshiba Zooming Utility
Custom option that allows you to select any one or all of the following programs: ❖ Microsoft Internet Explorer ❖ Microsoft Office ❖ Windows Media Player ❖ Adobe Reader ❖ Icons on the desktop To configure the Toshiba Zooming Utility, double-click the Toshiba Zooming Utility on the task bar.
Page 163: Toshiba Touch And Launch Utility
TOSHIBA Touch and Launch utility (Available on certain models) TOSHIBA Touch and Launch (available on certain models) is a program that adds features to the TouchPad. For example, by selecting an icon you can: ❖...
Page 164 A blue circle within the TOSHIBA Touch and Launch window represents your finger location on the TouchPad. As you move the blue circle over an icon in the TOSHIBA Touch and Launch window, the icon is highlighted or selected. Release your finger from a selected icon to choose the icon's function.
Page 165 Toshiba Utilities TOSHIBA Touch and Launch utility The TOSHIBA Touch and Launch window has the following parts: Corner icons Close button Back button Title Main window Functions Corner icons Sample parts of the TOSHIBA Touch and Launch window A short description of the currently selected corner icon appears below the TOSHIBA Touch and Launch window.
Page 166: Toshiba Touch And Launch Settings
TOSHIBA Touch and Launch is controlled/adjusted via an icon on the system tray. The icon will change color when the TOSHIBA Touch and Launch is active. Double-click the icon to open the TOSHIBA Touch and Launch Settings window. Right-click the icon to see the following shortcuts: ❖...
Page 167: Disabling Or Enabling Toshiba Touch And Launch
The Option button allows you to define how folders will open, define visual effects and control when to show help. A list of tables appears in the Table section of the TOSHIBA Touch and Launch Settings window. These are the same items (icons) you can choose in the Corner Assignment section of the TOSHIBA Touch and Launch Settings.
Page 168: Sd Memory Card Format
The TOSHIBA Button Controls allow you to customize the TOSHIBA Assist and TOSHIBA Presentation buttons. Those buttons are located just above the function keys at the top of the keyboard. To access this utility: Select the OPTIMIZE tab in TOSHIBA Assist and click the TOSHIBA Button Controls icon.
Page 169: Cd/Dvd Drive Acoustic Silencer
Toshiba Utilities CD/DVD Drive Acoustic Silencer The TOSHIBA Controls Properties window appears. Sample TOSHIBA Controls Properties window Click the selected button. Make the desired selections. Click Apply, then click OK. CD/DVD Drive Acoustic Silencer Sample CD/DVD Drive Acoustic Silencer screen...
Page 170 Toshiba Utilities CD/DVD Drive Acoustic Silencer This utility, available on TOSHIBA Assist, can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to Music CDs more enjoyable. When you change the CD/DVD drive to “Quiet” mode, the NOTE setting is only valid for the current Windows session.
Page 171: Toshiba Accessibility
TOSHIBA Accessibility TOSHIBA Accessibility The TOSHIBA Accessibility window The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the key a sticky key, meaning you can press it once, release it, and then press a function key to activate the hot key function.
Page 172: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 173 If Something Goes Wrong Problems that are easy to fix Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 174: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer To record the details: Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. Press simultaneously to copy the text to the Ctrl...
Page 175 If Something Goes Wrong Problems when you turn on the computer The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text and try typing again.
Page 176: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working If you are running on battery power, it is recommended that you do not leave the computer in Standby mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 177: Using Startup Options To Fix Problems
If Something Goes Wrong The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 178: Internet Problems
If Something Goes Wrong The Windows® operating system is not working Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access.
Page 179: Resolving A Hardware Conflict
If Something Goes Wrong Resolving a hardware conflict You can connect to Support Online by clicking Support from pcsupport.toshiba.com the menu or by going to Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ®...
Page 180: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
Page 181: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it. As a result, a hardware conflict can occur. Resolving conflicts There are several things you can do to resolve hardware conflicts: ❖...
Page 182 If Something Goes Wrong Resolving a hardware conflict Disabling a device Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. Select the specific device from the device category. To expand a device category, double-click the category.
Page 183: Memory Problems
If Something Goes Wrong Resolving a hardware conflict The operating system displays the Device Properties dialog box, which provides an array of tabs. They may include: ❖ The General tab, which provides basic information about the device. ❖ The Resource tab, which lists resources assigned to the monitor, optional external DVD-ROM, optional external diskette drive, and other power-using functions.
Page 184: Power And The Batteries
If Something Goes Wrong Resolving a hardware conflict Check for the error again. If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module.
Page 185 This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. Refer to this site often to stay...
Page 186: Keyboard Problems
If Something Goes Wrong Resolving a hardware conflict current on the most recent software and hardware options for your computer, and for other product information. For more information on maximizing battery power see “Charging batteries” on page 106. Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself.
Page 187: Display Problems
If Something Goes Wrong Resolving a hardware conflict Display problems Here are some typical display problems and their solutions: The screen is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing simultaneously.
Page 188 If Something Goes Wrong Resolving a hardware conflict The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties. This opens the Display Properties dialog box.
Page 189: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
Page 190 If Something Goes Wrong Resolving a hardware conflict Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds. To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check. On the pop-up menu, click Properties.
Page 191 If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software.
Page 192: Dvd-Rom Or Multi-Function Drive Problems
If Something Goes Wrong Resolving a hardware conflict DVD-ROM or multi-function drive problems You cannot access a disc in the drive. If the DVD-ROM or multi-function drive is an external drive, make sure that the drive’s cable is properly connected to the computer.
Page 193: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict Some discs run correctly but others do not. Check the type of disc you are using. The DVD-ROM drive supports the Digital Versatile Disc (DVD) formats DVD- ROM, DVD-R (read-only), plus CD-ROM, CD-R (read- only), and CD-RW (read-only).
Page 194 If Something Goes Wrong Resolving a hardware conflict these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. “Resolving a hardware conflict” on page 179. Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS).
Page 195 If Something Goes Wrong Resolving a hardware conflict Resolving PC Card problems Here are some common problems and their solutions: The slot appears to be dead. PC Cards that used to work no longer work. Check the PC Card status: Click Start.
Page 196 If Something Goes Wrong Resolving a hardware conflict Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: Double-click the Safely Remove Hardware icon on the System tray.
Page 197: Printer Problems
If Something Goes Wrong Resolving a hardware conflict Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper.
Page 198: Modem Problems
Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com.
Page 199: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 200 If Something Goes Wrong Resolving a hardware conflict ❖ Check Control Panel's Device Manager to verify that the ® Wi-Fi adapter is recognized by Windows , and that the driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time.
Page 201 If Something Goes Wrong Resolving a hardware conflict ❖ Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). ❖ Click Start, then click Run... ❖ Enter Cmd and press Enter. ❖...
Page 202: Dvd Operating Problems
If Something Goes Wrong DVD operating problems The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows XP wireless management facility, in which case you must use the adapter's management utility.
Page 203 “Checking device properties” on page 182 instructions on using Device Manager to view the DVD- ROM properties. Check the Toshiba Web site for new information on DVD-ROM drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 204 If Something Goes Wrong DVD operating problems Next to the words Desktop Area, move the slider to a lower setting, such as 800 x 600 or 640 x 480. Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion.
Page 205: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Click None. Click OK. Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 206: Data And System Configuration Backup In Windows Xp
If Something Goes Wrong Develop good computing habits Get familiar with all the user’s guides provided with your computer, as well as the manuals that come with the programs and devices you purchase. Your local computer store or book store sells a variety of self- help books you can use to supplement the information in the manuals.
Page 207 If Something Goes Wrong Develop good computing habits In the Restore point description field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.” Then click Create. Windows creates the Restore Point and automatically stamps it with the current date and time.
Page 208 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 209 If Something Goes Wrong Develop good computing habits NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: ❖...
Page 210 If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer and other Web browsers Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear.
Page 211 If Something Goes Wrong Develop good computing habits General tips for installing hardware and software Here are a few tips to help insure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe Photoshop, or utility software such as special toolbars for your web browser).
Page 212: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: ❖ Review the troubleshooting information in your...
Page 213: Contacting Toshiba
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 214: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred ❖ Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 215: Toshiba's Worldwide Offices
20041, Agrate Brianza Japan Milano, Italy Latin America and Caribbean Mexico Toshiba America Information Toshiba de México S.A. de C.V. Systems Sierra Candela No.111, 6to. Piso 9740 Irvine Blvd. Col. Lomas de Chapultepec. Irvine, California 92618 CP 11000 Mexico, DF.
Page 216 Spain United States The Rest of Europe Toshiba America Information Toshiba Europe (I.E.) GmbH Systems, Inc. Hammfelddamm 8 9740 Irvine Boulevard D-4-1460 Neuss Irvine, California 92618 Germany United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm.
Page 217: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 218: Password Security
Hot Keys Password security Password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Page 219: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Password security If you clicked Choose a screen saver, the Screen Saver tab has already been selected. If it is not selected, click the Screen Saver tab. Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time.
Page 220: Power Usage Mode
This hot key displays the power usage pop-up window and cycles through the battery save modes. Sample power usage modes The properties of each mode are set in the Toshiba Power Management utility. For more information, “TOSHIBA Power Saver” on page 156.
Page 221: Standby Mode
Hot Keys Standby mode Standby mode This hot key places the computer into Standby mode. ❖ A message box displays by default to confirm that the computer is entering Standby mode. You can choose not to display this message box. Sample Standby confirmation box ❖...
Page 222: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. ❖ If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box.
Page 223: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: ❖ Built-in display only ❖ Built-in display and external monitor simultaneously ❖ External monitor only ❖ ❖ TV and built-in display Sample display options window In order to use a simultaneous mode, you must set the resolution of the internal display panel to...
Page 224: Disabling Or Enabling Wireless Devices
Hot Keys Disabling or enabling wireless devices Disabling or enabling wireless devices This hot key informs you when the Wireless antenna on-off switch is in the off position. (No message appears when the Wi-Fi antenna on-off switch is in the on position.) Disabling or enabling the TouchPad This hot key enables/disables the TouchPad.
Page 225: Keyboard Hot Keys
This hot key switches screen or video modes. [Spacebar] Zooming applications in/out This hot key turns the Zooming utility to zoom- out. For more information, see “TOSHIBA Zoom- ing Utility” on page 162. This hot key turns the Zooming utility to zoom-in. For more information, see “TOSHIBA Zooming...
Page 226: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada United Kingdom UL approved CSA approved BS approved Australia...
Page 227: Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 228: Getting Started
❖ Double-click the ConfigFree icon on the taskbar. ❖ Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. ❖ Click the ConfigFree icon on the taskbar, and then...
Page 229 Using ConfigFree™ with your Toshiba Computer Getting Started If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 230: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 231 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ Location of wireless communication switch (identified with a yellow arrow) ❖ Status of wireless communication switch (on or off) Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 232 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen and an orange frame describes the relevant location.
Page 233: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the icon in the system tray.
Page 234 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample viewing Wi-Fi devices Creating a new wireless connection This feature is only supported on systems running Windows NOTE XP SP2. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher.
Page 235 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample dragging a device to the Access Point Sample Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection...
Page 236 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Creating a detected device wireless connection The following screen shows an example of Bluetooth devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Page 237 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample dragging the file to the Bluetooth device icon To be prompted for the device: Drag and drop the file to the Bluetooth radar icon on the ConfigFree Launcher. Sample dragging the file to the Bluetooth radar icon Or, you can right click on the file and select Send to Bluetooth Devices.
Page 238: Profile Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample selecting Send to Bluetooth Devices option Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. ® Disconnecting from a Bluetooth...
Page 239 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities office and at home can set up profiles to handle these networking environments. A profile contains the currently configured network settings on the computer, as well as information about any network devices. The following settings can be saved (or “captured”) in a profile: ❖...
Page 240 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Click the icon at the bottom of the screen to display more capture options. Under Captured Items, select the items you want to capture for this profile. If connecting with a wireless network, select the desired Auto Switch Settings.
Page 241 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample expanded Add Profile screen The online help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary.
Page 242: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the files via email.
Page 243 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user’s icon.
Page 244 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of sharing a file with one user ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired.
Page 245 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Participating users must be connected by LAN, wireless LAN, NOTE or Bluetooth (PAN). Firewall software may prevent ConfigFree SUMMIT from working. Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: Click the icon in the system tray.
Page 246: Quick Connect
(DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re-...
Page 247 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities To review the current Toshiba Wireless Projector settings and change them if necessary: Click the icon in the system tray. Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Settings. The Quick Connect properties dialog box appears.
Page 248 Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.
Page 249: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 250 Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature To use the Semi-Automatic Switch feature: Right-click the icon in the system tray. Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be automatically selected when the SSID is detected, then click Add.
Page 251: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. alternating current BIOS basic input/output system bits per second compact disc CD-ROM compact disc read-only memory CD-RW compact disc rewrite memory CMOS...
Page 252 Glossary direct current direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission gigabyte...
Page 253 Glossary random access memory radio frequency interference read-only memory real-time clock SCSI small computer system interface DDRAM double data random access memory SRAM static random access memory SVGA super video graphics adapter thin film transistor universal serial bus uniform resource locator wide area network World Wide Web Terms...
Page 254 Glossary application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 255 Glossary cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD —...
Page 256 Glossary controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
Page 257 Glossary disk — A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive —...
Page 258 Glossary DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD- ROMs. Compare CD-ROM. emulation — A technique in which a device or program imitates another device or program.
Page 259 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 260 Glossary icon — A small image displayed on the screen that represents a function, file, or program. interlaced — A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image.
Page 261 Glossary logical drive — A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives. memory —...
Page 262 Glossary non-system disk — A disk for storing programs and data that cannot be used to start the computer. Compare system disk. online — Available through the computer. Online may refer to information being read from your own computer’s hard disk, such as online documentation or online help, or to information coming from another company on a company network or the Internet.
Page 263 Glossary processor — See central processing unit (CPU). program — A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties —...
Page 264 Glossary select — To highlight or otherwise specify text, data, or graphics with the intent to perform some operation on it. serial — Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel.
Page 265 Glossary utility — A computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system management. Web — See World Wide Web. Wi-Fi — A trademarked term by the Wi-Fi Alliance which stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components.
Page 266: Index
220 adding memory 52 real-time clock (RTC) 105 adjusting recording quality 136 removing 115 Alt keys 83 BIOS setup assign keys see Toshiba Hardware Setup Fn-esse 148 button audio power 51 .wav files 135 start 125 audio features 135...
Page 267 DMA 180 keyboard 74 IRQ 180 mouse 74 character keys 82 disable/enable charging the battery 49 TOSHIBA Touch and Launch checking device properties 182 click 61 Disk Defragmenter 190 communications disk drive network connection 129 corrupted/damaged data files system resources 180...
Page 268 Index troubleshooting 192 printing 91 DVD-ROM/multi-function drive restoring 92 problems 192 saving 88 FN keys 83 Fn-esse environment starting 146 computer-friendly 39 using to assign keys 148 error messages Fn-esse program 146 device driver conflict 179 assigning a key 146 general hardware problem 179 using drag-and-drop 147 non-system disk or disk error...
Page 269 Index key assignment viewing existing 149 icon 124 key assignments desktop 125 changing or removing existing Internet Explorer 125 moving to desktop 124 keyboard recycle bin 125 character keys 82 safety 36 function keys 83 Industry Canada requirement 4 hot keys 225 installation not working 175 memory module 53...
Page 270 Index mouse port installing 74 COM 127 serial 74 Ethernet LAN 130 RGB 72 power network computer will not start 174 accessing 129 connecting cable Dial-Up Networking Wizard Adapter 47 energy-saving features 103 networking problem solving 184 wireless 129 turning on 51 universal power supply 226 power button 51 opening the display panel 50...
Page 271 PC Card inserted 195 screen does not look right/ computer will not power up 174 flickers 188 contacting Toshiba 212 Startup options 177 corrupted/damaged data files system resources 180 URL address not found 178 Device Manager 181...
Page 272 TOSHIBA Touch and Launch TOSHIBA Button Controls 168 Toshiba Hardware Setup 160 setting up a connection 130 Toshiba online resources 102 settings TOSHIBA Touch and Launch 163 TOSHIBA Touch and Launch disable/enable 167 Toshiba utilities 145 sound traveling tips 122...
Page 273 Index Web sites 213 Toshiba 214 Wi-Fi wireless networking 129 Windows Explorer 86 Windows Media Player 98 Windows Start menu 86 Windows XP Help and Support 178 problem solving 176 Windows XP desktop 123 wireless interoperability 7 wireless networking 129...

This manual is also suitable for:

A100 va3 - satellite - pentium dual core 1.6 ghz A105 s1712 - satellite - celeron m 1.6 ghz A105 s2101 - satellite - celeron m 1.6 ghz A105 s2201 - satellite - celeron m 1.6 ghz A105 s2717 - satellite - pentium m 1.73 ghz A105 s361 - satellite - pentium m 2 ghz ... Show all

Toshiba A105-S4004 - Satellite - Core Duo 1.66 GHz User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Toshiba Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree with Your Toshiba

Quick Links

Related Manuals for Toshiba A105-S4004 - Satellite - Core Duo 1.66 GHz

Summary of Contents for Toshiba A105-S4004 - Satellite - Core Duo 1.66 GHz