Zoom & Tilt (Switch); Night Mode (Switch) - HP 914c - iPAQ Business Messenger Smartphone Navigation Manual

Note:
When you reach 2D view by tilting the map, Smart Zoom will tilt the map
as you press the Follow button or it disappears after the timeout (set in Advanced
settings) expires. Use the 3D Map toggle to permanently switch to 2D view.
Note:
If the map is zoomed out so that the view angle is automatically raised to
top down view, this button will have no immediate effect. When you zoom back
in, the view angle will or will not change according to the new state of the
button.
Zoom & Tilt (switch)
When the light is on, additional transparent buttons (Page 4 ) appear on the left side
of the map screens for zooming and tilting without the use of hardware buttons.
The Tilt buttons appear only at higher zoom levels. If you zoom out, they disappear.

Night Mode (switch)

Turn on or off the night colours manually to override the automatic colour scheme
switching.
Note:
Using this option turns off the Automatic Night Colours feature. You need
to re-enable it at the General settings screen (Page 76) to have the colours
change automatically again.
2
57