Architecture Overview
The C24 consists of the following blocks:
Digital Block
Micro-controller Unit (MCU) for system and user code execution.
•
Digital Signal Processor (DSP) for voice and data processing.
•
Serial communications interfaces.
•
•
•
•
Digital audio (PCM) bus interface.
•
General purpose IO signals.
•
Analog Block
Power Management IC (PMIC).
•
•
•
Analog audio interface management.
•
•
•
•
Real Time Clock (RTC) subsystem.
•
CDMA Transceiver Block
RF receiver.
•
Signal processing IC for transmit and receive CDMA data.
•
IC CELL/PCS RX filter.
•
IC Triplexer for CELL/GPS/PCS.
•
IC CELL/PCS duplexer.
•
IC 1.575 GHz GPS Low Noise Amplifier with Integrated Filter.
•
IC CELL/PCS LGA Termination Directional Couplers.
•
IC CELL/PCS 3x3 Power Amplifier Module.
•
IC CELL/PCS Tx Filter.
•
8
USB driver interface
UARTs
UIM card
Internal regulators
1 external regulator for customer use
Speaker, microphone
Alert speaker
Headset
C24 Module Hardware Description
December 15, 2008