Advertisement
EST PATTERN
1. To print the test pattern, enter the initial maintenance mode. Press the
"0" key one time and then press the "9" key one time. The unit will
continue to display "MAINTENANCE" on the LCD and print a test
pattern as shown in Figure 1.
2. Upon completion of printing the test pattern, the unit will emit one long
beep indicating it has returned to the initial maintenance mode.
-mirmvm
m m m m m m m m m m m m m m m m m m m m m m m m m
l
n
n n n n n n n n n n n n n n n n n n n n n n n n n
SECOND LEVEL SOFT SWITCH FUNCTIONS
1. To 8nt8r the Second
key one time. When the unit is set to the factory default settings, the
LCD will display %/SW1 =,oooooooo".
'Switch" and they are numbered from left to right 1 through 8. Table
2. The cursor, which is the line under the first 0 on the LCD, can be
using ttl8 "R" or "** key.
3. To Change a function place the cursor under the switch that needs to
be changed and press either the "1" or "0" key as necessary.
n
n l
Soft Switch Functions, 8nt8r the initial
PSB No: P-0070
Page: 3 of 8
n l
,
Each "0" is r8ferred to as a
n n n n
Advertisement
