Adjusting The Clock; Initial Settings Before Operations - Kenwood KDC-X396 Instruction Manual

Adjusting the clock

1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [SETTINGS], then press to enter.
3 Turn the volume knob to select [CLOCK], then press to enter.
4 Press the volume knob to select [CLOCK ADJUST] / [CLOCK ADJ].
Clock hour flashes on the display.
5 Turn the volume knob to adjust the hour, then press to enter minute adjustment.
Clock minutes flashes on the display.
6 Turn the volume knob to adjust the minute, then press to confirm.
Press 4 / ¢ to move between the hour and minute adjustment.
7 Hold to finish the procedure.

Initial settings before operations

1 Press SRC to enter [STANDBY] mode.
2 Press the volume knob to enter [FUNCTION] mode.
3 Turn the volume knob to select [INITIAL SET], then press to enter.
4 Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
5 Hold to finish the procedure.
Item
PRESET TYPE NORMAL/ NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;
MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ AM).
KEY BEEP ON */ OFF: Activates/deactivates the keypress tone.
PANDORA SRC For
ON *: Allows you to select "PANDORA" source by connecting an iPhone or iPod touch (with the Pandora®
internet radio application). ; OFF: Disables "PANDORA" in source selection.
BUILT-IN AUX/ ON *: Enables "AUX" in source selection. Sound of the connected external component is produce through the
BUILTIN AUX car speakers. ; OFF: Disables "AUX" in source selection.
CD READ 1 *: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No
sound can be heard if an audio file disc is played.
SWITCH PRE
For
REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on
the rear of the unit (through an external amplifier).
SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.
F/W UP xx.xx YES *: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
About "KENWOOD Music Editor"
This unit supports the PC application "KENWOOD Music Editor Light ver1.1" or later.
When you use the audio file with database information added by the "KENWOOD Music Editor Light ver1.1," you can
search a file by title, album or artist name using Music Search.
In the Instruction manual, the term "USB device" is used to mean the device that contains audio files with database
information added with KENWOOD Music Editor.
"KENWOOD Music Editor Light ver1.1" is available from the following web site: www.kenwood.com/cs/ce/
For further information on "KENWOOD Music Editor Light ver1.1," refer to the site above or the application help.
8
Selectable setting (Preset: *)
:
: