Adjustment; Panel Facilities And Specifications - Pioneer RFD-1 Service Manual

RFD-1

6. ADJUSTMENT

There is no information to be shown in this chapter.

7. PANEL FACILITIES AND SPECIFICATIONS

PANEL FACILITIES
1
SPECIFICATIONS
General
Power requirements .................................. AC 220-230 V, 50/60 Hz
Power conpsumption ................................................................. 6 W
Weight .................................................................................... 1.1 kg
Dimentions ..................................... 202 (W)
Accessories
¶ Operating instructions ................................................................. 1
¶ Power cord ................................................................................. 1
NOTE:
Specifications and design are subject to possible modification without
notice.
Accessories
Power cord
(ADG1127)
14
2
3
194 (D) 50 (H) mm
POWER switch
1
Provides electrical power to the unit.
2
DIGITAL IN switch
Use to select which of the DIGITAL IN terminals to use
(either COAXIAL or OPTICAL).
3
DEMODULATE indicator
When lighted, indicates that the input signal supplied to
the Dolby Digital (AC-3) RF IN terminal is being
demodulated.
"Dolby", "Digital (AC-3)" and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.