Table of Contents
Advertisement
I Operating peripheral e quipment u singthe remotecontrol
Programming The Illuminated Remote Control Using Access Codes
The Universal Remote Control can be programmed to operate many manufacturers'
components, using the component
function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming
your
Remote Control with or without a code for the component.
Determine
the
manufacturer
of the
component
and
look
in the table
for
the code.
1
Confirm that the external component is plugged in and operating.
2
Turn the component off.
3
Press POWER and ACTION together, for at least 5 seconds.
After 5 seconds, all the illuminated mode keys will begin to flash.
Release the POWER and ACTION keys.
4
_
_
Press the mode key.
The mode key will illuminate steadily, all others will go out.
,[o0o I
®®®
© ®®
Enter the 3-digit component code using the Remote Control numeric keypad.
Press the Remote Control _
to test the component. If the procedure is successfuL,
the component will turn on.
Default Modes For Remote Control
TV
DTV
CABLE
DBS
VCR
DVDICD
AUX
RCVR
(Panasonic Only)
DTV (Panasonic Only)
CABLE (Preset)
DBS (Preset)
VCR (Preset)
DVD and CD (Preset)
Personal
Video Recorders,
Tape and VCR2
Audio Receiver (Preset)
Panasonic TV Codes
Panasonic DTV Codes
Panasonic CABLE Codes
Panasonic DBS Codes
Panasonic VCR Codes
Panasonic DVD Codes
Panasonic
Personal
Video
Recorders Code
Panasonic RCVR Code
Helpful Hints: Unsuccessful Code
If the component
does not operate with the Remote
Control,
repeat the procedure
using another
code.
(Some brands have multiple codes).
If an incorrect code is entered, or if the procedure takes
longer than 30 seconds,the
programming will fail.
58
Advertisement
Table of Contents
