Removing The Battery Pack - NEC MOBILE TERMINAL EX User Manual

Placing the BATTERY PACK
1.
Move the safety lock to "
2.
Align the grooves at both sides of the BATTERY PACK to the guides on the device body
and push the BATTERY PACK.
3.
Place the BATTERY PACK and move the safety lock to "
(Note: Power cannot be turned on if the safety lock is not in "
Groove

Removing the BATTERY PACK

1.
Confirm that the power is turned off (the power lamp is OFF).
2.
Move the safety lock to "
3.
Slide the release lever to the left (arrow direction in the figure below).
4.
The BATTERY PACK will be pushed up slightly. Pull it straight and remove the battery.
."
Guide
."
(1) Confirm that the
power lamp is OFF.
- 15 -
"
.")
(2)
(3)
(1)
(4)
(3)
(2)