Audio; Channels - Sony BRAVIA KDL-32XBR950 Operating Instructions Manual

Audio

Problem
Good picture, no sound
Audio noise
Cannot gain enough volume
when using a cable box
Sound seems weak or
insufficient
Cannot raise the volume on
external speakers

Channels

Problem
Cannot receive upper channels
(UHF) when using an antenna
TV is fixed to one channel
Cannot receive any channels
when using cable
Cannot receive or select
channels
Some digital cable channels are
not being displayed
Possible Remedies
s MUTING
Press so that
s
Make sure the Speaker
s
(For KDL42XBR950 only) Make sure the
display unit is set to OFF.
s Communication problems may occur if the infrared communication equipment
(e.g., infrared cordless headphones) is used near the TV. Please use headphones
other than infrared cordless headphones. Also, if you use the infrared
communication equipment other than infrared cordless headphones, move the
infrared transceiver away from the TV until the noise is eliminated, or move the
transmitter and receiver of the infrared communication equipment closer together.
s
Increase the volume of the cable box using the cable box's remote control. Then
press FUNCTION repeatedly until the TV indicator lights up and adjust the TV's
volume.
s
The TV's audio might be set to
Stereo. In the Audio menu (see page 106), set the
already set to Stereo, switch to
during weak stereo broadcasts).
s If the Speaker option is set to
order to output the sound to your audio system) use your audio receiver to adjust
the sound (see page 107). Or, to use the remote control, set the
to Variable.
s
To turn on the TV's speakers, set the
Possible Remedies
s ANT
Press to select the VHF/UHF input. (see page 58)
s Auto Program
Use in the Channel menu to add receivable channels that are not
presently in the TV's memory (see page 110).
s Auto Program
Use in the Channel menu to add receivable channels that are not
presently in the TV's memory (see page 110).
s Channel Fix
Check your
s
Use Auto Program in the Channel menu to add receivable channels that are not
presently in the TV's memory (see page 110).
s ANT
Press to select the CABLE input. (see page 58).
s
Use Auto Program in the Channel menu to add receivable TV channels that are
not presently in TV's memory (see page 110).
s Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
s
The digital cable channel may be set to
78).
Muting
disappears from the screen (see page 58).
option is set to On in the Audio menu (see page 107).
EXT SP
Auto SAP or Mono, when it might be better set to
Mono (which may reduce background noise
Off and the Audio Out
Speaker
option to
settings (see page 110).
Hide
in the Digital Setup menu (see page
switch at the rear of the
MTS setting to Stereo. If
option is set to Fixed (in
Audio Out option
On
(see page 107).
125