Table of Contents
Advertisement
Operating Instructions
Phase 2
This product does not support aggressive mode.
*1
•
Set up the IPsec policy as shown below.
Items
Protocol
Source Network
Source IP address
Destination Network
Destination IP address A global address of camera server
9.
Access this product (see page 12).
•
If you can access this product, the IPsec setup is complete.
Notes
•
In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
•
If you cannot communicate using IPsec, see page 20 of the
Troubleshooting on the Setup CD-ROM.
•
See the Panasonic support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec
features.
54
IKE Items
Mode
PFS
Cipher Algorithm
Message-Digest
Algorithm
Lifetime
ANY
Network address and subnet mask on the LAN side of the
VPN router
A global address on the WAN side of the VPN router
A global address of camera server
Settings
Quick mode
Specifies either of Off, D-H Group 1 or D-
H Group 2.
Select from DES-CBC, 3DES-CBC,
AES-CBC (128, 192, 256 bits) or NULL.
(Multiple selections are available.)
HMAC-MD5-96, HMAC-SHA-1-96
(Multiple selections are available.)
Specifies by 28800 s (Byte setting is not
supported.)
Settings
Advertisement
Table of Contents
