Setting The Wireless Lan Access Point - Panasonic Toughbook CF-C1ADAAZ6M Reference Manual

Wireless LAN
Using the Wireless LAN Function
Before using a wireless LAN, turn the wireless LAN communication on.
Turning on/off the wireless LAN communication
1
Slide the wireless switch to turn on/off wireless LAN. (
When turning on wireless LAN
If you cannot turn on wireless LAN using the wireless switch, confirm the Wireless Switch Utility setting (
139).
Windows 7
If you cannot turn on wireless LAN in the Wireless Switch Utility, try the following procedure.
Click or
A
Click [Change adapter settings].
B
Right-click [Wireless Network Connection] and click [Enable].
C
A standard user needs to enter an administrator password.
When [Disable] is displayed, [Wireless Network Connection] is already enabled.
Turn on wireless LAN in the Wireless Switch Utility.
D
NOTE
Windows 7
You can use the following procedure instead of turning on wireless LAN in the Wireless Switch Utility.
Click (Start) - [Control Panel] - [Adjust commonly used mobility settings].
A
Click [Turn wireless on] in [Wireless Network].
B
• When [Turn wireless off] is displayed, the wireless network is already on.
• If you cannot select [Turn wireless on], the wireless switch is turned off.
Windows 7

Setting the wireless LAN access point

Preparation
Follow the instruction manual of the wireless LAN access point to make settings for the access point to recognize the computer.
1
Turn the wireless LAN on.
2
Click or
3
Select an access point, and click [Connect].
on the notification area and click [Open Network and Sharing Center].
on the notification area.
143
page 138)
page