Panasonic Toughbook CF-19PJRFXAM Reference Manual page 120

Troubleshooting (Advanced)
Touch Pad / Touchscreen (only for model with touchscreen)/Dual Touch (only for
model with dual touch)
The cursor does not work.
Cannot input using the touch pad.
Cannot point the correct position using
the included stylus/digitizer pen.
<Only for model with touchscreen>
Cannot input using the touchscreen
Cannot use scroll function of touch
pad on Internet Explorer.
PC Card / ExpressCard (only for model with ExpressCard slot)
A card does not work.
SD Memory Card
Cannot use an SD Memory Card.
Connect the external mouse correctly.
Restart the computer using the keyboard.
Press and press 3 times, and press
Enter.
If the computer does not respond to keyboard commands, read "No response."
( page 125).
Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility (
The touch pad may be disabled by some mouse drivers. Check your mouse's
operating instructions.
<Only for model with touchscreen>
Perform the touchscreen calibration (
<Only for model with dual touch>
Perform the dual touch calibration (
Set [Touchscreen Mode] to [Auto] or [Tablet Mode] in the [Main] menu of the
Setup Utility ( page 94).
Use Touchscreen or Dual Touch.
Move the mouse cursor to outside of Internet Explorer, and return to Internet
Explorer.
Insert the card correctly.
The card does not conform to the card standard.
Restart the computer after installing a driver (of card or other device).
Set [PC Card Slot] and [ExpressCard Slot] to [Enabled] in the [Advanced] menu
of the Setup Utility ( page
The port settings are not correct.
Read the instruction manual of the card or contact the manufacturer of the card.
Remove the card and insert it again (
The driver is not compatible with the operating system.
Set [SD Slot] to [Enabled] in the [Advanced] menu of the Setup Utility (
97).
to select [Restart] and press
page 11).
page 13).
97).
page 35).
120
page 94).
page