Table of Contents
Advertisement
Location and function of each part (continued)
Connection terminals
1 REMOTE1 lN/OUT terminal
When two or more main units are used in the
system, they can be connected and controlled
with a wired remote control cable (M3 jack).
2 REMOTE2 IN terminal
The user can remotely control the main unit by
using an external control circuit to this terminal
(D-SUB 9-pin female).
3 SERIAL IN terminal
This terminal is an RS-232C compliant input
terminal (switching necessary) to connect a PC
and to externally control the main unit (D-SUB
9-pin female).
4 SERIAL IN terminal
This terminal is an RS-422 compliant input
terminal (switching necessary) to connect a PC
and to externally control the main unit (D-SUB
9-pin female).
5 SERIAL OUT terminal
This terminal is an RS-422 compliant output
terminal (switching necessary) to supply signals
given to the serial input terminal (D-SUB 9-pin
male).
16 – ENGLISH
1
2
7
8
9
(pp. 28-29, 80, 106-109)
(pp. 28-29, 80, 106-109)
(pp. 29, 106-109)
3
4
j
k
6 LAN terminal (10BASE-T/100BASE-TX)
(p. 18)
This terminal is used for connecting a LAN cable.
7 VIDEO IN terminal
(p. 110)
An input terminal for video signals. (BNC)
8 VIDEO OUT terminal
An output terminal (active through) for video
signals. (BNC)
9 S-VIDEO IN terminal
An input terminal for S-video signals (Mini DIN
4-pin). This terminal complies with S1 signals
and automatically toggles between 16:9 and 4:3
according to the size of input signals.
j RGB (YP
A terminal to input RGB or YP
k RGB2 IN terminal
A terminal to input RGB or YP
15-pin female).
l DVI-D IN terminal
An input terminal for DVI-D signals.
5
6
l
P
) 1 IN terminal
B
R
P
B
R
P
B
R
(pp. 28-29, 93)
(p. 28)
(p. 28)
(p. 28)
(pp. 28, 29)
signals (BNC).
(p. 29)
signals (D-SUB
(pp. 28, 29)
Advertisement
Chapters
Table of Contents
