Table of Contents
Advertisement
PROBLEM
No sound...
Low volume...
Distorted sound...
Cannot hear the desired audio type...
Cannot switch audio...
Cannot record...
A part or whole of a recorded title has been
lost...
Timer recording does not work properly...
VCR Plus+ system does not work properly...
Timer recording does not stop even when
STOP is pressed...
The timer program remains even after
recording finishes...
Strip-shaped black noise is recorded...
Cannot record video or sound from the
external device...
• Make sure your antenna system (TV or CABLE) is correctly set.
• Check the connections. Check the input mode on the amplifier if you have connected
one.
• Turn SURROUND off if it causes distortion.
• Press AUDIO to select the desired audio type.
• If "D.MIX" does not appear in the display when playing multi-channel DVD-Audio, audio
output will be the front two speakers only.
• You cannot change the DVD-Audio audio type if the software producer has restricted
play in stereo.
• Turn off SURROUND in the following cases.
- When using discs that do not have surround sound effects such as Karaoke discs.
- When playing MTS broadcast programs.
• You have used digital connection. Set "Dolby Digital" to "PCM" or connect to other
equipment using audio cables (analog connection).
• It is not possible to switch the audio when the recording mode is XP and "LPCM" has
been selected in the SETUP menu, "Audio for XP Recording".
→ Select "MAIN" or "SAP" from "Select MTS" in the Audio menu before recording.
• There are discs which audio cannot be changed because of how the disc was created.
• You haven't inserted a disc or the disc you inserted cannot be recorded on. Insert a disc
the unit can record onto.
• The disc is unformatted. Format the disc.
• The write-protect tab on the cartridge is set to "PROTECT" or the disc is protected with
"DISC SETTING".
• Some programs have limitations on the number of times they can be recorded (CPRM).
• The disc is full or nearly full. Erase unneeded titles or use another disc.
• You cannot record on finalized DVD-R discs.
• If you repeatedly insert discs or turn this unit on and off 50 times or more, the recording
or editing of DVD-R may be disabled.
• The material you are trying to record is copy-guarded.
• Timer recording will not be activated when in editing or transfer (dubbing). Timer
recording will begin after the editing/transfer (dubbing) is finished.
• You cannot record the COMPONENT and HDMI signals.
• If the power shuts down or the plug is disconnected from the household AC outlet while
recording or editing, the program may be lost or the disc may become unusable.
→ We cannot offer any guarantee regarding lost titles or discs. You will have to format
the disc ([RAM]) or use a new disc.
• When connected to cable TV box or satellite receiver, the VCR Plus+ system does not
work.
• The timer program is incorrect or different timer program times overlap. Correct the
program.
• The clock is not correct. Set the clock.
• Correct the guide channels with "VCR Plus+ CH Setting" in the PROGRAM CHANNEL
menu.
• The same guide channel is set to 2 or more channel positions. Set the guide channel
correctly or delete unnecessary channels.
• Timer recording will not be activated during formatting, transfer (dubbing) and other
such operations which should not be interrupted when they are being carried out.
• Press and hold STOP for a few seconds to turn "
• The timer program remains if set to daily or weekly.
• The device in playback is interfered with by the TV because the device is too close to
the TV. Move the device away from the TV.
• The external device is not correctly connected.
• The proper external input channel (L1 or L2) is not selected.
CORRECTION
RAM
" off. Recording stops.
Page
15
16~20
31
48
13
–
31
18, 69
69
–
9
61
9, 61
38
55
–
–
–
–
16, 17
–
–
41
23
24
24
–
40, 41
41
–
16~20
43
73
Advertisement
Table of Contents
