Expansion Cards
For more information on expansion cards, refer to
"Expansion Cards."
Problem
My HP iPAQ does
not recognize the
SD expansion card.
I cannot insert
my SD card.
I cannot remove my
SD card.
Solution
• Be sure you have firmly pushed the SD expansion card into the
HP iPAQ.
• Be sure any third party drivers are installed.
• Reset the device by using the stylus to lightly press the Reset
button on the bottom of the HP iPAQ.
• Be sure the label is facing the front of the unit.
• Be sure you are not inserting the card at an angle.
• Be sure you insert the connection area first.
• Be sure you are not inserting an SD size card into the mini-SD slot.
• Be sure you have removed the blank filler card that ships with
the device.
Push the SD card in to release the locking mechanism. The card will
pop out slightly and can then be easily removed.
Chapter 11,
Troubleshooting
14–8