Digital Powered Speakers - HP z560 User Manual

Digital Powered Speakers

You can install a digital audio system with up to two front
speakers, two surround speakers, two surround back
speakers, a center speaker, and a subwoofer to your
HP Digital Entertainment Center.
Do not connect analog multichannel speaker outputs if
you connect the digital output.
You can connect either the coaxial or optical digital audio
cable, depending on your system. If you have both
cables, connect one cable only.
Insert optical cords straight in until they click into
■
place.
Do not bend or tie optical cords.
■
To connect six-channel (5.1 speaker) digital output to a speaker digital input:
1
Connect a digital audio coaxial or optical cable to
a Digital Audio Out connector on the back of your
HP Digital Entertainment Center.
2
Connect the digital audio coaxial or optical cable to
the speakers.
Digital powered speaker installation (5.1 shown)
Some powered speakers can generate
(upmix) the 7.1 audio with 5.1 input
channels. Refer to your product
documentation.
3
Plug in the speaker system power. Refer to the
speaker documentation.
4
Turn on the speaker system.
DIGITAL
AUDIO IN
Coaxial Optical
Choose one
AUDIO OUT AUDIO 7.1 PRE-OUT
SURROUND SURROUND CENTER FRONT Y
BACK
L L L L
Pb
Pr
100-240V- 4/A 50/60Hz
R R R SUB R
AC IN
WOOFER
COAXIAL
10/ 100/ 1000
OPTICAL
DIGITAL AUDIO HI SPEED USB 2.0 1394 ETHERNET
OUT
Digital Audio Out
n
WIRELESS LAN 802.11 a/b/g
REMOVABLE ANTENNA
ACTIVITY
LINK
TV SOURCE 1 IN
CABLE/ANT. IN FM ANTENNA IN
R L
DUAL 75 Ω
AUDIO
VIDEO S-VIDEO COAXIAL
TUNER
TV SOURCE 2 IN
HDTV / SDTV ANT. IN
R AUDIO L S-VIDEO
ATSC TUNER
INFRARED TRANSMITTER OUT
2 1
Connecting Audio
53