Installing An Expansion Card - HP Brio BA Upgrade Manual

Replacing Expansion Cards

Installing an Expansion Card

Installing an Expansion Card
You will need to have removed the cover. Refer to "Removing the Cover" on page 8.
For you safety, disconnect the power cord and all external cables.
Caution
1 Locate a free socket. If the card is an ISA card, then it must be located in the
long black socket, otherwise the card is located in the shorter, white sockets.
2 Remove the blanking plate for the socket by moving the fixing screw and
then pulling the plate up and out of the socket.
3 Push the card into the socket, making sure that it is firmly seated.
4 Replace the screw.
5 Replace the cover. Refer to "Replacing the Cover" on page 10.
42