Table of Contents
Advertisement
Command Line Interface
TFTP Client Setup Commands
When the user enters tftp, the screen will show all commands about the TFTP
client:
ggdbg>tftp
tftp srvip <IP ADDRESS>
tftp get <FILENAME>
tftp update
Current Settings :
TFTP Server IP Address : 172.16.6.245
Image File Name : 102nmm01.tfp
tftp srvip <IP ADDRESS>
Definition:
Example:
– set the IP address of TFTP server
– get the remote image file
– update the image in flash
This command sets the IP address of the TFTP server.
The image must be resident on that TFTP server. If the
IP address is invalid, the message ERROR will be
displayed.
ggdbg>tftp srvip 172.16.6.245
OK
If <FILENAME> is not specified,
the image file name in
EEPROM will be employed.
74
Advertisement
Table of Contents
