D-Link DI-713P Quick Install Manual page 5

The DI-713P default wireless
settings will work out of the
box with any other D-Link
products.
The factory settings are:
channel: 6
network ssid: "default"
To enable WEP encryption, select
the encryption type. (Enable
either the 64 or the 128 bit
encryption.)
Then enter the encryption key, as
shown.
Note: Each key must consist of 5
pairs of hex digits, which means
that only digits 0-9 and letters A-
F are valid.
Click Save and Restart the com-
puter to save changes.
3 3
Checking the connection to the Internet Checking the connection to the Internet
To check the connection, open the
web browser and go to your
favorite website.
If you are unable to browse,
please do the following:
1. Refer to Appendix B to check
your connection to the wireless
router.
2. Use "Help" on the Main
Menu.
3. Refer to the troubleshooting
section in the user's manual.
DI-713p.4.9.01