Stackable NWay Ethernet Switch User's Guide
Switch Module
Figure 7-2. Switch Module window
To set basic Switch settings, enter a System Name in the first field, the physical location of the Switch in the
System Location field, and the name of the contact person responsible for the Switch in the System Contact
field. Then click Apply.
Two hyperlinks at the bottom of this window provide access to the Switch Module Information and
Advanced Switch Stack Features windows, respectively. These windows are described in the two sections
that immediately follow.
The information in the window above is described as follows:
♦ Device Type A description of the Switch type.
♦ MAC Address The Ethernet address for the device.
♦ Boot PROM Version Version number for the PROM code.
♦ Firmware Version Version number of the firmware installed on the Switch. This can be updated by
using the Firmware and Configuration Update window in the Maintenance section.
♦ System Name A user-assigned name for the Switch.
♦ System Location A user-assigned description of the physical location of the Switch.
Web-Based Network Management
107