D-Link DES-3010FA Web User Manual page 91

D-Link DES-3010FA/GA User Guide
•
Traps — Indicates if traps are enabled for Multiple Hosts. The possible field values are:
–
True — Indicates that traps are enabled for Multiple hosts.
–
False— Indicates that traps are disabled for Multiple hosts.
•
Trap Frequency — Defines the time period by which traps are sent to the host. The Trap Frequency (1-
1000000) field can be defined only if multiple hosts are disabled. The default is 10 seconds.
•
Status — Indicates the host status. If there is an asterisk (*), the port is either not linked or is down. The pos-
sible field values are:
–
Unauthorized — Indicates that either the port control is Force Unauthorized and the port link is down, or
the port control is Auto but a client has not been authenticated via the port.
–
Not in Auto Mode — Indicates that the port control is Forced Authorized, and clients have full port
access.
–
Single-host Lock — Indicates that the port control is Auto and a single client has been authenticated via
the port.
–
No Single Host — Indicates that Multiple Host is enabled.
•
Number of Violations — Indicates the number of packets that arrived on the interface in single-host mode,
from a host whose MAC address is not the supplicant MAC address.
2. Click . The Multiple Host Settings Page opens:
Figure 45: Multiple Host Settings Page
3. Modify the Port, Enable Multiple Hosts, Action on Violation, Enable Traps, and Trap Frequency fields.
4. Click . The multiple host settings are modified, and the device is updated.
Page 90