Brother DCP-9040CN Software User's Manual page 50

Pre-Scanning to crop a portion you want to scan
You can preview your image and crop unwanted portions before scanning by using the PreScan button.
When you are satisfied with the preview, click the Start button in the Scanner Setup dialog box to scan the image.
a
Put the document face up in the ADF, or face down on the scanner glass.
1 Scanning area
b
Choose the settings for Scan (Image Type), Resolution, Scan Type, Brightness, Contrast and
Document Size, as needed.
c
Click PreScan.
The whole image is scanned into the PC and appears in the Scanning Area of the Scanner Setup dialog
box.
d
Press and hold down the left mouse button and drag it over the portion you want to scan.
1 Scanning area
Note
You can enlarge the image using the
original size.
icon, and then use the
1
1
icon to restore the image to its
Scanning
2
2
43